Wibur Curtis Company SD2 specifications Illustrated Parts List

1.Loosen the small screw on the metal guard. Rotate it away from the adjustment screw (fig. 1.).

2.Carefully, turn flow adjustment screw clockwise all the way in (see figure 2.). Observe restrictor position . Do not overtighten.

3.Now turn the flow adjustment screw counter clockwise three [3] turns (or 1½ turns from the fully open position).

4.Replacethemetalguard.

5.Install the valve on the tank, attaching wires and silicone tube. Press the valve fully into the fitting on the heating tank.

II. Toadjustavalvecurrentlyonyourunitortotesttheoperationofthenewvalve:

A.Turn on power to the unit. Turn on the water line and allow the tank to refill.

B.Place a container under the nozzle. Allow the unit to return to set temperature (Ready indicator will light).

C.Press the dispense button at the station that you are adjusting.

D.Measurethewatervolume.

E.Making adjustments of the restrictor with the valve mounted on the tank.

1.Turn the adjustment screw clockwise to decrease water flow.

2.Turn the adjustment screw counter clockwise to increase the water flow..

III.Close the access panel, return canisters to the unit turn the product delivery elbows downward and close the front door.

Illustrated Parts List

Item Nº	Part Nº	Description
1	WC-WC-5851	COVER, TANK W/NOTCHES
2	WC-43062 *	GASKET, TANK LID
3	WC-5502 *	PROBE, WATER LEVEL
4	WC-29047	ELBOW, OVERFLOW, PLASTIC
5	WC-3734 *	KIT, DUMP VALVE 120V 12W
6	WC- 904-04*	HEATING ELEMENT 1.6KW 120VAC W/NUTS
7	WC-1438-101 *	SENSOR, TEMPERATURE TANK
8	WC- 521 *	SWTICH, #4680 VESSEL LIMIT
9	WC-2628	BUSHING, CONICAL .469 ID SILICONE
10	WC-29046	TEE, INLET PLASTIC GEN USE
11	WC-54210	TANK ASSY, 1600W-120VAC
12	WC-62016	HEATING TANK COMPLETE, 1600W-120V
13	WC-58137	COVER, TOP
14	CA-1113-01 *	CANISTER ASSY, SMALL
15	CA-1111-01 *	CANISTER ASSY, LARGE
16	CA-1026-03	ELBOW, CANISTER
17	WC-37123	FAN, EXTRACT 120V 29CFM 60Hz
18	WC-29601	SPOUT ASSY, HOT WATER
19	CA-1037-6R	TUBE, EXTENSION RED 2.5” LG.
20	WC-58172	COVER, SWITCH PANEL
21	WC- 727	PANEL, SWITCH 4 BUTTONS 4 LEDS
22	CA-1049-102	STRIKE, MAGNET SCREW MOUNTED
23	WC-43048 *	SPACER BOARD .25 OD x .125L
24	CA-1005-03 *	STEAM TRAP
25	CA-1009-03 *	MIXING BOWL
26	CA-1024-05 *	PILLAR, LOCATION BLACK

*Suggested Parts to Stock

Item Nº Part Nº Description

27CA-1006-03 * CHAMBER, WHIPPER

28CA-1128* NOZZLE, DISPENSE SD2

29WC-58173 DOOR, FRONT WA

30WC-39471 LABEL, CONTROL PANEL SD2

31WC-38290 LABEL, DOOR CURTIS LOGO SD2

32CA-1095 CONNECTOR, ORIFICE WATER

33CA-1011-05 BULKHEAD, WATER FITTING

34WC-66011 * PLATE, WHIPPER CHAMBER

35WC-38269 LABEL, SPLASH PANEL

36WC-58144 SCREEN, DRIP TRAY

37WC-58180 PAN, DRIP TRAY

38WC- 826L * VALVE, INLET 1.15 GPM

39WC- 788 * CONTROL POWER MODULE HYBRID

40WC- 718-101 TRANSFORMER ASSY, 240/120VAC-12VAC 500mA

41WC- 102 * SWITCH, TOGGLE NON-LIT 25A 120/240VAC

42WC-58142 COVER, DUMP VALVES

43WC-58127 COVER, SIDE ACCESS

44CA-1049 MAGNET, SNAP-IN

45WC-3765L* KIT, INLET VALVE REPAIR FOR USE ON WC-826L

46WC-3518 * LEG, GLIDE 3/8”-16 X 1/2”

47WC-3503 * LEG, SCREW BUMPER 3/8-16 STUD

48WC-5310 * TUBING, 5/16” ID x 1/8” W SILICONE

49WC-1030 * HOSE, EXTRACTOR FAN

50WC-37201* KIT, GEAR MOTOR & GEAR SD2 ONLY

51CA-1036 GEAR, PLASTIC

5