English

Ductless – In ductless installations, air is vented back into the kitchen through the opening in the range hood grille. If you do not anticipate heavy

cooking, this method may be preferable. Ductless installation requires the use of a charcoal filters (included) to remove odors, which should be replaced at regular intervals depending on use. Check with your local retailer or dealer for replacements. For ductless discharge do not remove A or B.

Note: This charcoal filter is not dishwasher safe!

Preparation of Electrical Connections

Note: If replacing an existing hood, the electrical cable may need to be re-routed to the desired position.

1.Determine the location of the electrical cable to connect to the range hood (Fig. 2). The preferred location for the electrical connector, vertical or horizontal, will depend on the existing installation or ease of routing wiring. All electrical connections must comply with national and local codes. Transfer the location of the selected range hood knockouts

to the bottom of the cabinet or onto the wall, then cut or drill a hole to allow for clearance of the electrical cable clamp. Be careful not to cut into any hidden utilities, such as electrical wires.

2.Once you have planned your ducting and electrical installation, remove the appropriate electrical knockouts on the back or top of the range hood, attach the damper frame and install a standard electrical cable clamp.