Liebert 30-130kVA manual Configuration, User Settings, Security Access and Passwords, Exit

Operation

3.2Security Access and Passwords

Password protection is provided in the Npower UPS system to protect you from any unauthorized con- figuration of the system. A default password is installed on your system when you receive it.The default password is NPWR. It is important, however, that you enter your own secure password as soon as possible. The following procedure will enable you to do this.

1.From the MAIN MENU on the Display Screen, navigate to the primary CONFIGURATION Screen. It will look like the figure below.

Figure 6 Configuration screen

CONFIGURATION

SYSTEM RATINGS

SYSTEM SETTINGS

FACTORY SETTINGS

ALARM MASK

CUSTOMER ALARM INTERFACE

EXIT

2.Highlight USER SETTINGS using arrow keys, and press SELECT.

3.The USER SETTINGS screen will come up.

4.Bracket NEXT using arrow keys and press SELECT five times. This will take you to the sixth page of the USER SETTINGS screen.

Figure 7 User settings screen, page 6

USER SETTINGS

AUTO RESTART SETTING		SYSTEM
ACTIVE FILTER ENABLE		ENABLED
TEMPERATURE BATT. CB TRIP		NO
CHANGE PASSWORD
INTERRUPTED TRANSFER ENABLE		DISABLE
PREV.	CANCEL	SAVE & EXIT

Highlight CHANGE PASSWORD. This action will bring up the PASSWORD screen. You must know the current password in order to change it. Next, you will be prompted to enter a new 4-digit pass- word. The new password may contain letters from A through Z and/or digits from 1 through 9.

5.You now have 5 minutes to examine and configure password-protected screens.

6.After five minutes you must re-enter the password in order to unlock further password-protected screens.

NOTE

The TIME and DATE of all password changes are logged in the event log.

eac

18