Operation
Time
To set the system's real time clock, do the following:
1.From the System Configuration screen, press the Up or Down button to move the highlighted cursor to TIME.
2.Press SELECT. The TIME screen will appear.
3.Press SELECT to move the arrow to the next digit to the right.
4.When the arrow is on the digit to be changed, press the Up or Down button to increase or decrease the hour/minute/ second number. Press SELECT to set the value and move to the next digit.
5.After the correct hour/minute/second has been set, press SELECT again to return to the System Configuration screen.
NOTE
1. Precise Date and Time functions are required for accurate archival and event history purposes.
2.Both the Date and Time can be set from a remote terminal. Refer to Section 3.5 - Communication Interfaces.
Figure 45 Time setting screen
CURRENT TIME
Figure 46 System settings, page 2
SYSTEM SETTINGS
ORDER NUMBER | 00000000 | |
SYSTEM CONFIG | SMS | |
SYSTEM / MODULE | 1 | |
NUMBER OF MODULES IN SYSTEM | 1 | |
NUMBER OF BATTTERY CABINETS | 1 | |
NEXT | PREV. CANCEL SAVE & EXIT | |
To continue configuring the system, highlight NEXT and press SELECT.
41
