Sony DHC-MD373 manual Press MENU/NO Press MD HS, To cancel automatic track marking

— Track Mark

6 Press MENU/NO.

7 Press MD HS.

Recording starts.

To stop recording

Press MD x.

To cancel automatic track marking

1Press MENU/NO on the remote during recording pause. “Setup ?” appears, then press ENTER/YES on the remote.

2Press . or > on the remote repeatedly until “T.Mark LSync” appears, then press ENTER/YES.

3Press . or > repeatedly until “T.Mark Off” appears, then press ENTER/YES.

4Press MENU/NO. “LEVEL-SYNC” disappears.

When “LEVEL-SYNC” is off, a track number is marked only at the beginning of each recording.

Marking track numbers at a specific point during recording

You can mark track numbers at any time during recording, regardless of the type of sound source.

Making a space between tracks 3 seconds long — Smart Space

The Smart Space function lets you make the blank spaces between tracks 3 seconds long automatically while making a digital recording from a CD. For other types of recording, if the Smart Space function is on and there is no sound input for about 3 seconds or more (but less than 30 seconds) while recording, the MD deck replaces this silence with a blank of about 3 seconds and continues recording.

No sound input for less than 30 seconds

Off

On

Replaced with a blank of 3 seconds and recording continues

Auto Cut: When the Smart Space function is on, if there is no sound input for 30 seconds or more, the MD deck replaces this silence with a blank of about 3 seconds and enters recording pause.

No sound input for 30 seconds or more

Off

The MD Deck — Recording

`/1

Z HS x

On

Z HS x

z

. m M >

z REC

,Press zREC during recording at the point you want to add a track mark.

The tracks following the added one are renumbered.

Replaced with a blank of 3 seconds and recording pauses

continued

31