Sony DHC-MD373 manual Setting the time, 1 2 4,6, Press ENTER/YES or CURSORt, If you make a mistake

Step 2: Setting the time

You must set the time beforehand to use the timer functions.

The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24-hour system is used for illustration purposes.

`/1

1

2 4,6

CURSORT	m	M	4
3,5	.	>	3,5
	H

Xx

DISPLAY

4 Press ENTER/YES or CURSORt.

The minute indication flashes.

5 Press . or > to set the minute.

6 Press ENTER/YES.

The clock starts.

If you make a mistake

Press CURSORT or t repeatedly until the incorrect item flashes, then set it again.

To change the preset time

You can change the preset time while the system is off.

1Press DISPLAY to display the clock.

2Press CLOCK/TIMER SET.

3Repeat steps 3 to 6 of “Setting the time”.

Tip

The upper dot of the colon flashes for the first 30 seconds, and the lower dot flashes for the last 30 seconds of each minute.

1 Turn on the system.

2 Press CLOCK/TIMER SET.

The clock appears and the hour indication flashes.

3 Press . or > to set the hour.

6