Sony DHC-MD373 Moving recorded tracks, 2 3,4,6, 3,4,5, Press ENTER/YES if point A is correct

Erasing recordings (continued)

8 Press ENTER/YES if point A is correct.

“Point B Set” appears and playback for setting the ending point of the portion to be erased (point B) starts.

9 Continue playback until the deck reaches point B, then press ENTER/ YES.

“A-B Ers” and “Point B ok?” appear alternately and the deck repeats a portion of the few seconds before point A and after point B successively.

10 Press . or > repeatedly to find point B.

The procedure is the same as step 6.

11 Press ENTER/YES if point B is correct.

“Complete !!” appears for a few seconds and the portion between point A and B is erased.

To cancel A-B Erase

Press MENU/NO.

Note

If “Impossible” appears, the specified portion cannot be erased. This happens when you have edited the same track many times. This is due to a technical limitation of the MD system and is not a mechanical error.

Moving recorded tracks

— Move Function

You can use this function to change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered.

E.g.: Moving track 3 to position 2.

Track
number	1	2	3			4
Original	A		B	C		D
tracks
	1	2		3		4
After
	A		C		B	D
MOVE
				`/1

2 3,4,6

mM

3,4,5	.	>	3,4,5
		H
1	X	x

1 Press MD to switch the function to MD.

2 Press MENU/NO to display “Edit Menu”.

3 Press . or > repeatedly until “Move ?” appears, then press ENTER/ YES.

40