Sony DHC-MD373 manual Checking the disc titles, Labelling a CD

Labelling a CD (continued)

2 Press NAME EDIT.

The text input screen appears, and the cursor flashes.

Cursor

3 Press CHARACTER to select the desired type of character.

Each time you press the button, the display changes as follows:

(Blank space) tA (Upper cases) ta (Lower cases) t0 (Numbers) t! (Symbols) t (Blank space) t…

4 Press . or > repeatedly to select the desired character.

To enter a black space

Press CURSORtwithout pressing . or

>. You cannot enter a space as the first character.

To enter a symbol

You can use the following 24 symbols.

! ” # $ % & ’ ( ) + , – . / : ; < = > ? @ _ `

5 Press CURSORt.

The character you selected in step 4 stops flashing and the cursor shifts to the right.

Cursor

6 Repeat steps 3 to 5 to complete the entire title.

If you make a mistake

Press CURSORTor tuntil the character you want to change flashes, then repeat steps 3 to 5.

To erase a character

Press CLEAR while the character is flashing. You cannot insert characters.

7 Press ENTER/YES to complete the labelling procedure.

The disc title is stored in the system memory and then the original display appears.

To cancel labelling

Press MENU/NO.

Checking the disc titles

1Press MENU/NO in stop mode.

2Press . or > repeatedly until “Name Check ?” appears, then press ENTER/YES.

3Press . or > repeatedly to select the disc titles stored in the system memory between 01 and 50.

To check the current disc title

Press SCROLL in stop mode.

20