Sony DHC-MD373 manual Using the CD display, Programming CD tracks, To check the programme order

Programming CD tracks (continued)

To check the programme order

Press . or > repeatedly during Programme Play.

To	Do this
Cancel	Press x, then press PLAY MODE
Programme	repeatedly until “PGM” and
Play	“SHUFFLE” disappear.
Add a track to	Do steps 3 and 4.
the programme
(in stop mode)
Erase the entire	Press x, when Programme Play is
programme	in stop mode.

Using the CD display

You can check the remaining time on the current track or on the CD. When a CD TEXT disc is loaded, you can check the information recorded on the disc, such as the titles or artist names.

mM

DISPLAY

. >

H

Xx

To select the desired track using the remote

Press numeric buttons instead of performing steps 3 to 5.

To enter track numbers 10 or over, press >10 and the track number. To enter 0, use the 10/0 button.

Tips

•The programme you made remains after Programme Play finishes. To play the same programme again, press H.

•“Step Full” appears when you try to programme 26 or more tracks (steps).

•“--m--s” appears when the total CD programme time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.

,Press DISPLAY.

Each time you press the button during normal play or in stop mode, the display changes as follows:

During normal play

tElapsed playing time on the current track x

Remaining time on the current track

x

Remaining time on the CD*

x

Track title of the current track**

x

Clock display

x

Effect name

18