Sony DHC-MD373 Set the time to start play, Press ENTER/YES, Press ?/1 to turn off the system

4 Press ENTER/YES.

“ON” lights up, and the hour indication flashes.

5 Set the time to start play.

Press . or > repeatedly to set the hour, then press ENTER/YES.

The minute indication flashes.

Press . or > repeatedly to set the minute, then press ENTER/YES.

The hour indication flashes again.

6 Set the time to stop play following the above procedure.

7 Press . or > repeatedly to select the desired sound source.

The indication changes as follows:

tTUNER yCD PLAY T

tTAPE PLAY* yMD PLAY T

*Select this to use another component (the optional tape deck TC-TX373) as the sound source.

8 Press ENTER/YES.

The start time, the stop time, and the sound source appear in turn, before the original display returns.

9 Press ?/1 to turn off the system.

To change the setting

Start over from step 1.

To check the setting / activate the timer

Press CLOCK/TIMER SELECT, then press . or > until “SET DAILY” appears. Then, press ENTER/YES.

To cancel the timer

Press CLOCK/TIMER SELECT, then press . or > repeatedly until “TIMER OFF” appears. Then press ENTER/YES.

Tip

When you connect the optional tape deck TC-TX373 to the system, you can activate the tape deck using the Daily Timer function without setting the timer on the tape deck.

Notes

•You cannot activate Daily Timer and recording timer at the same time.

•Do not operate the system from the time the system turns on until the play starts (about 30 seconds before the preset time).

•If the system is on at the preset time, the set sound source starts playing.

•If you use another component (except for the optional tape deck TC-TX373), you must set the timer on both systems to the same time.

•You cannot use the components connected to the DIGITAL OPTICAL IN jack or LINE IN jack as the sound source for Daily Timer.

Other Features

49