Sony DHC-MD373 To check the setting / To use the timer, To change the setting, Other Features

To change the setting

Start over from step 1.

To check the setting / To use the timer

1Press CLOCK/TIMER SELECT.

2Press . or > to select either “MD REC” or “TAPE REC”, then press ENTER/YES.

To cancel the timer

Press CLOCK/TIMER SELECT and press . or > repeatedly until “TIMER OFF” appears, then press ENTER/YES.

Tip

When you record from the radio, the station name (see page 46, or frequency when the station is not labelled), the start time and the stop time are automatically recorded on the MD.

Notes

•The Smart Space and Level Synchro Recording functions do not operate.

•You cannot activate Daily Timer and the recording timer at the same time.

•Do not operate the system from the time the system turns on until the recording starts (about 30 seconds before the preset time).

•When you record on a brand new MD, the first 15 seconds are not recorded.

•If the system is on about 30 seconds before the preset time, the timer-recording will not be activated.

•The volume is reduced to minimum during recording.

•When the timer is set, the Power Saving Mode does not function.

•If you use another component (except for the optional tape deck TC-TX373), you must set the timer on both systems to the same time.

You cannot activate the component with this system’s timer.

Other Features

51