Sony DHC-MD373 Messages, C41/CannotCopy, C71/CheckOPT-IN, AutoCut, BlankDisc, CannotEdit, Eject

C41/CannotCopy

The sound source is a copy of a commercially available music software, or you tried to record a CD-R (Recordable CD).

cThe Serial Copy Management System prevents making a digital copy (see page 55). You cannot record a CD-R.

C71/CheckOPT-IN

This appears momentarily because of the signal of the digital broadcast during recording. cThere is no affect on the recorded contents. No component is connected to the DIGITAL OPTICAL IN jack, or a digital component is not connected properly.

cConnect a digital component to the DIGITAL OPTICAL IN jack properly using a digital connecting cable (not supplied, see page 53). The connected digital component is not turned

on.

cSee the operating instructions supplied with the connected component and confirm whether the component is turned on.

The digital connecting cable connected to the DIGITAL OPTICAL IN jack is pulled out, or the connected digital component is turned off during digital recording.

cConnect the cable, or turn on the digital component.

Messages

One of the following messages may appear or flash in the display during operation.

MD

AutoCut

The MD deck is pausing the recording because silence continued for 30 seconds or more during digital recording.

BlankDisc

The inserted recordable MD is new, or all tracks on the MD have been erased.

CannotEdit

•A pre-mastered MD is in the deck.

•You tried to edit in Programme or Shuffle Play mode.

CannotREC

•A pre-mastered MD is in the deck.

•The function is switched to MD.

Complete!!

The editing operation of MDs is completed.

DiscFull!!

There is no time remaining on the MD.

Eject

The MD deck is ejecting the MD.

Impossible

•You tried to make an impossible editing operation.

•You cannot combine the tracks due to the system limitations of MDs.

NameFull

There is no more space to store track or disc titles.

NoDisc

There is no disc in the MD deck.

NoName

You tried to show the title of a non-labelled disc or track.

—OVER—

You have reached the end of the MD while keep pressing MD/CD M> during playing pause.

PushSTOP!

You pressed PLAY MODE during play.

—Rehearsal—

The MD is playing the specified dividing point for confirmation during the Divide function.

SmartSpace

The signal was input again after silence continued for 3 or more but less than 30 seconds during digital recording.

continued

Additional Information

59