Sony DHC-MD373 manual Playing an MD, Recording a CD on an MD, Before pulling out the mains lead

Recording a CD on an MD (continued)

Tips

•If you use a partially recorded MD, recording starts after the recorded tracks.

•The track numbers of the CD are recorded on to the MD automatically.

•Depending on the disc, CD TEXT information may also be recorded. If “TEXT” flashes during recording, press NAME EDIT, and then press ENTER/YES to record the title of the current track. (If “TEXT” is lit, it is automatically recorded.)

•You can adjust the recording level to the desired volume after performing step 4 (see page 33).

Before pulling out the mains lead

MD recording is completed when the MD Table of Contents (TOC) is updated. The TOC is updated when you eject the MD or press ?/1 to turn off the system. Do not pull out the mains lead before updating the TOC (while “TOC” is lit) or while updating the TOC (while “TOC” is flashing) to ensure a complete recording.

If the MD becomes full during recording

The CD player and the MD deck stop automatically.

Note

If the MD is record protected, “C11” and “Protected” appear alternately and the MD cannot be recorded. Remove the MD, then slide the record protection tab to the closed position (see page 25).

Playing an MD

To turn on the system, press ?/1 (power). You can play an MD just like a CD.

?/1 (power)	2
MD Z MD indicator		MD x
Z	HS	x
`/1

Z HS x

z

. m M >

MD/CD VOLUME

.m/M>

1 Insert an MD.

With the arrow pointing toward the deck

With the label side up, and the shutter on the righthand side

2 Press MD HS.

Play starts. The H indicator on the

MD HS button lights green.

Track number Playing time

12