Zanussi ZBP 1165 manual Cooking Functions, Programming the Oven, How to set the minute minder

Cooking Functions

The following list displays in sequence all the available cooking functions.

1FAN COOKING - This setting allows you to

roast or roast and bake simultaneously using any shelf, without flavour transference. Pre-set temperature: 175°C.

2 CONVENTIONALCOOKING-Theheatcomes from both the top and bottom element, ensuring even heating inside the oven. Pre-set temperature: 200°C.

3	DOUBLE GRILL - The full grill element will be
	on. Recommended for large quantities. Pre-
	set temperature: 250°C.
4	GRILL - It can be used for grilling small
	quantities. Pre-set temperature: 250°C.
5	THERMAL GRILLING - This function offers an

alternative method of cooking food items, normally associated with conventional grilling. The grill element and the oven fan operate together, circulating hot air around the food. Pre-set temperature: 180°C.

Select a maximum temperature of 200°C.

6PIZZA - The bottom element provides direct heat to the base of pizzas, quiches or pies,

while the fan ensures air is circulated to cook the pizza toppings or pie fillings.

Pre-set temperature: 175°C.

7BOTTOM - The heat comes from the bottom of the oven only, to allow you to finish your dishes.

Pre-set temperature: 250°C.

8	TOP - The heat comes from the top of the oven
	only, to allow to you finish your dishes. Pre-set

temperature: 250°C.

9DEFROST – The oven fan operates without

heat and circulates the air, at room temperature, inside the oven. This function is particularly suitable for defrosting delicate food which could be damaged by heat, e.g. cream filled gateaux, iced cakes, pastries, bread and other yeast products.

10 PYROLYTICCLEANING - This function allows you to clean thoroughly the oven cavity.

Programming the Oven

How to set the minute minder

1. Touch the "Time Function" control . The symbol

flashes near the "Minute Minder" symbol and the time display shows "0.00" (Fig. 10).

2.Symbol will flash for 5 seconds. Within this time, touch control ““ to select the required time (Fig. 11). Maximum time is 23 hours 59 minutes. After another 5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory and that the countdown started.

3.When the programmed time has elapsed, you hear

an acoustic alarm while symbol flashes and the time display shows "0.00".

4.To switch off the acoustic alarm, touch any control.

The oven will NOT switch off if in use.

The Minute Minder function can also be used when the oven is off.

To change the Minute Minder setting

Touch the "Time Function" control : the symbol flashes near the "Minute Minder" symbol . It is now

possible to change the Minute Minder setting by touching control “ “ or ““ (Fig.11).

To cancel the Minute Minder:

Touch time function control : the symbol flashes near the "Minute Minder" symbol . Then touch control “ “ until the time display shows "0.00".

Fig. 10

Fig. 11

9