Zanussi ZBP 1165 manual To select a Cooking Function, To set the temperature and time, Fig. Fig

To select a Cooking Function

1.Switch on the oven by touching the "ON/OFF" control

.

2.Touch the "Cooking Functions" control to select

the required oven function. Each time control is touched, a different cooking symbol appears in the lower section of the display and the description of the cooking function appears as a message in the upper section. The pre-set temperature for each function is shown in the lower section, and symbol " " flashes on the right hand (Fig. 8).

3.Symbol " " flashing means that it is possible to adjust the pre-set temperature by touching control “ “ or ““ (Fig. 9). Temperature level is adjusted in 5 degree steps. Please note that symbol " " will flash for 5 seconds.

4.When 5 seconds elapse, symbol " " will come off showing that the temperature level has been stored in the Electronic Control memory. The thermometer

symbol rises slowly , indicating the degree to

which the oven is currently heated.

5.When the required temperature is reached, an acoustic alarm will sound for a short time and the thermometer symbol will light permanently.

To set the temperature and time

Control “ “ and ““ are used to adjust both the temperature and the time settings. Details about using them according to the different functions of the Oven Electronic Control are given in the following chapters.

As a general rule, please note that:

>Controls “ “ and ““ are used to increase or decrease the temperature seetings while symbol " " flashes on the right hand of the temperature display. When you choose a cooking function, symbol " " keeps flashing for 5 seconds only. This is the useful interval to touch controls “ “ or ““ and select your temperature setting. Once these 5 seconds elapse, symbol " " comes off and the thermometer symbol

comes on: this means that the current selection

has been stored in the Oven Electronic Control memory and that the oven is currently heating up.

>Controls “ “ and ““ are used to increase or decrease the time settings while the symbol is flashing near the "Clock" symbol , the "Minute Minder" symbol , the "Cooking Duration"

symbol or the "End Of Cooking Time" symbol . When you choose a time function, symbol keeps flashing for 5 seconds only. This is the useful interval to touch control “ “ or ““ and select your time setting. Once these 5 seconds elapse, symbol stops flashing: this means that the current selection has been stored in the Oven Electronic Control memory.

8

Fig. 8

Fig. 9