Waste Outlet Line, Plumbing Connections

Plumbing Connections

WASTE OUTLET LINE

Connect a 2" drain line to the Waste Xpress waste . outlet as specified per local codes (see Figure 18 . for water outlet location).

InSinkErator recommends that the water outlet . empties into a floor drain.

If the water outlet connection on the Waste Xpress needs to be switched to the other side, complete . the following:

•Remove the four screws holding the cap and gasket in position (see Figure 18).

•Install gasket, cap and inlet fitting on reverse side . and secure with appropriate screws.

NOTE: The Waste Xpress system should not be plumbed directly into a small inside grease trap. The unit can be plumbed through a large exterior grease trap.

PLUMBING CONNECTIONS

The syphon breaker is supplied with all Waste Xpress systems (packed separately).

Syphon breaker must be installed above the sink flood plane per local plumbing codes. Check direction of water flow arrows.

The solenoid valve is supplied with a 24 V coil.

•The flow control valve regulates all cold water flowing into the disposer and Waste Xpress. This conserves . water and prevents overloading.

WATER SUPPLY CONNECTIONS

When connecting the incoming water supply to the disposer, sink bowl and Waste Xpress, use as few elbows and tees as possible.

All cold water line fittings are 1/2" NPT except the sink bowl nozzles which are 1/2" compression. . Use 1/2" compression fitting to connect hot water . to Waste Xpress.

Install the flow control valve, water solenoid valve, and syphon breaker according to the direction of the arrows marked on each valve body.

NOTE: In-line hot and cold shutoff valves are recommended close to the Waste Xpress system for ease of service.

ROUTING WATER FLOW

Connect cold water only to disposer, bowl, or trough.

Connect hot water only to Waste Xpress for hot water spray nozzles.

In a trough system, route all water flow to the end of the trough to flush food waste.

PROPERTY DAMAGE System has hot water spray that must be . connected. Fresh water connection to the . Waste Xpress must be hot water only. Failure . to use hot water may clog system and result . in malfunction.

	Syphon Breaker
Sink Bowl		Cold Water Solenoid		Hot Water Solenoid	Waste Xpress
		1-1/2" min			1" min
		(38.1 mm			1" min
		min)			(25.4 mm min)
Disposer
		Flow Control Valve	Shut Off Valve
			Shut Off Valve
			(supplied
	WX-101A Controller		by others)
	WX-101A Controller
		10 max
		(3.1 m max)

Figure 19. Typical Installation Diagram

14481 specifications

The InSinkErator 14481 is a standout model in the realm of food waste disposers, known for its powerful performance and innovative features. Designed for both residential kitchens and professional use, it effectively transforms food scraps into fine particles that are easily disposed of through the plumbing system.

One of the hallmark features of the InSinkErator 14481 is its robust motor. With a high-speed operation reaching 3,450 RPM, it efficiently grinds food waste, ensuring that even fibrous materials like celery and potato peels are easily pulverized. This not only minimizes the risk of clogs in your plumbing but also reduces odors that can arise from food waste sitting in a trash bin.

The unit utilizes a patented SoundSeal technology, which significantly dampens noise during operation. This feature makes it an excellent choice for home kitchens where peace and quiet are desired, as it addresses one of the common concerns associated with food disposers - the noise level. Users can enjoy peace of mind knowing their kitchen remains tranquil even while they manage food waste.

Another key characteristic of the InSinkErator 14481 is its multi-grind technology. This allows for a more versatile grinding capability, meaning the disposer can handle a wider variety of food types with ease. Whether it's tough meats, fibrous vegetables, or even small bones, this model excels in pulverizing waste, making post-meal cleanup a breeze.

Installation of the InSinkErator 14481 is straightforward, as it comes with a convenient Quick Lock mounting system, enabling easy attachment to standard sink flanges. This feature is invaluable for homeowners who may want to install the unit themselves or replace an older model with minimal hassle.

In terms of build quality, the InSinkErator 14481 is constructed using durable materials designed to withstand the rigors of daily use. Its powerful motor is backed by a generous warranty, reflecting the manufacturer's confidence in its longevity and performance.

In conclusion, the InSinkErator 14481 is a highly efficient food waste disposer that combines power, innovation, and convenience. Its features, including a high-speed motor, SoundSeal technology, and multi-grind capabilities, make it an ideal choice for anyone looking to simplify kitchen cleanup while enhancing sustainability efforts by reducing food waste.