Haier 350M Location, Preparation, Unpacking, Check attached accessories and materials, located

Location

The appliance should be placed on a flat and solid surface. If the refrigerator is placed on a plinth, flat, strong and fire-resistant materials must be used. The front black foot of the refrigerator can be adjusted clockwise or anti-clockwise to lift or lower the refrigerator if it is placed on an uneven surface.

Adjustable Foot

Clockwise Anti-clockwise

The refrigerator should be placed in a	The refrigerator shall be placed away
well-ventilated area, and a space of 10cm or	from heat sources or direct sunlight.
more should be allowed around the
refrigerator.
>10cm
>10cm
>10cm

Never place the refrigerator in an area with	Never place the refrigerator near to a water
an ambient temperature below zero.	source. Clean and dry any water splashes
Never operate the refrigerator outdoors or in	and stains with soft cloth.
rain.

O

6

Preparation

1 Unpacking

Remove all packing materials.

2 Check attached accessories and materials.

Check if all accessories specified in the Packing List are available. Contact the local distributor if shortage is found.

3	Ensure that the refrigerator is properly
	located.
	(See section Location)
4	Clean the refrigerator before using.
	(See section Cleaning)

5 Time lapse before power supply

Connect the refrigerator to power source at least 30 minutes after the refrigerator is sited and cleaned.

Caution: After unpacking, write down the model and manufacture number of the refrigerator on the Warranty Certificate which will be required if technical services are applied for.

7