Haier HPIMD25W, HPIMD25S, HPIMD25B manual Cleaning and maintenance

Page 9

English

6.During the operation process, if the level of the water in the reservoir becomes to low, the “Add Water” LED indicator will display.

NOTE: If for any reason such as water shortage, to much ice, power off, etc., do NOT restart the machine right away. Wait at least 3 minutes before attempting to restart.

7.The ice maker automatically stops producing ice when the ice storage compartment is full. The “Ice Full” LED indicator will light as confirmation.

NOTE: As a safety precaution, the auger inside the ice storage compartment and dispensing will automatically stop working if the transparent hatch on top of the unit is even partially open.

WARNING: Do NOT attempt in any way to disable the safety switch activator on the transparent hatch or inside the ice storage compartment.

8.To dispense the ice, push forward on the ice cube dispenser paddle. That will activate the auger inside the ice storage compartment, first back, then forward and allow ice cubes to drop down the shoot. The blue overhead light should also come on when paddle is pushed forward.

NOTE: Transparent hatch on top of the unit must be closed fully for auger to operate and ice to dispense.

cleaning and maintenance

WARNING:

Never clean the ice maker unless the power is OFF and unit is unplugged.

Full strength solvents, detergents, and abrasives must never be used for cleaning.

Never tilt or place the icemaker on its side, otherwise you must wait 2 hours for compressor coolant to settle.

It is recommended that the appliance is cleaned once a month or more frequently in areas where chalky deposits can be a problem. A recommended cleaning solution is 1 part vinegar to 10 parts water. The appliance should be allowed to complete one ice making cycle, thoroughly rinsed with fresh water and dried with a soft cloth. Any residual vinegar may cause the next ice cubes to be soft or slushy. If this happens, the unit should be rinsed again with fresh water.

Before using your ice maker, it is strongly recommended to clean it thoroughly

1.Power should be off and unit unplugged

2.Clean the interior with diluted vinegar solution, warm water and a soft cloth

3.Use water to rinse the interior and remove water thru the drain by removing the drain cap.

4.It is suggested to change the water in the reservoir daily for optimum hygiene.

8

Image 9 Contents
Model #/ Modéle #/ Para Modelo de # HPIMD25W/B/S Important Safeguards You will need it to obtain warranty service Keep for your records to obtain Warranty ServiceUnpacking Your ICE Maker Product RegistrationSafety Instructions Wiring and Grounding InstructionsAttempting any maintenance or cleaning Table of contents Parts, functions and features Pre-operating instructions Operating instructions Cleaning and maintenance English For Haier Customer Service, please call TRoubleshooting guideMonths for parts Functional Parts Only Limited warrantyConservez CES Instructions À Usage Domestique Uniquement Enregistrement DU Produit Déballage DE Votre Machine À GlaceInstructions DE Sécurité Instructions de filage et de mise à terreEntretien et nettoyage Table DES Matieres Garantie limitée SpécificationsPression Pièces, fonctions et caractéristiques Instructions de pré-opération Pour commencer Instructions d’opérationNettoyage et entretien Retirez le plateau dégouttement de leau Guide de dépannage Problème Causes possibles SolutionQu’est-ce qui est couvert et pour combien de temps? Garantie LimitéeConserve Estas Instrucciones USO Doméstico Únicamente Desembalaje DE LA Máquina DE Hielo Registro DEL ProductoLo necesitará para obtener el servicio de garantía Cuando realice mantenimiento o limpieza Instrucciones DE Seguridad ImportantesContenidos EspecificacionesPresión del diseño Piezas, funciones y características Instrucciones para antes del funcionamiento Cómo comenzar Instrucciones de funcionamientoLimpieza y mantenimiento Español Español Guía para la detección y solución de problemas Qué cubre Garantía limitadaImportante