Haier WQP4-2000N user manual Dish washing, Poorer cleanness, Switch on the appliance

Page 10

OPERATION INSTRUCTIONS

C.Dish washing

1.Switch on the appliance.

Press the ON/OFF switch and the indicators for drying and normal wash illuminate.

3.Food containers drying

1)After washing is finished and the power switch is switched off, open the door. Food containers will be dry in several minutes.

4.End of wash.

ON OFF

2.Program selection

Select proper program (see page 7). The program indicator lights in 5 seconds and the wash process starts.

SELECT START / PAUSE

Poorer cleanness

1.Do not let food containers lapped.

If too many food containers are put in it, the lapped parts can not be washed. If it is necessary to lap the containers, make sure that water can spray direct to the inside of the containers.

2.Yellow or balck spots on food containers

When yellow or black spots are seen on food cantainers, it means that more iron or tea elements are in the containers.

3.Check the following items:

1)Chopsticks and forks that protrude out too long will prevent the spray from turning. If so, please rearrange them.

2)When the filter or the sprayer is blocked, clean them, please.

3)Please use special detergent.

4)Do not cover the washing container with food containers.

5)Remove hard matters adhering to the food containers.

KVK

Image 10
Contents Contents Specially designed for easy access of dishes FeaturesAll mentioned above are advanced Features of the appliance Parts and Functions ON/OFF switch VFD display Program select button Power cable must not be damaged SafetyUse the special power socket Do not use the unit as flush dishwasherAvoid it enter your eyes When putting the shelf in or closing the door, makeAfter 10cm Draining hose should be as lateral as possibleEnvironment temperature for operation is 5-40C Before OperationOperation Instructions Program selectionShelfThe container which Dishes are put in is called shelf Put in detergentSwitch on the appliance Poorer cleannessDish washing Weekly Maintenance Daily MaintenanceFollows are not abnormal Maintenance Monthly MaintenancePower failure When alarm signal occursPower failure, ice up or water failure Ice upUnder following situation Technical specifications Electric Principle Diagram = b