Extron electronic PA 300 Installation and Operation, Installation Overview, Mounting the PA

Installation and Operation

Installation Overview

1

Be certain the source device, the PA 300, and the output device are turned off and disconnected from the power source.

2

If desired, mount the PA 300 in a rack or furniture. See "Mounting the PA 300", below.

3

Cable the inputs and outputs to the PA 300. See "Cabling" on page 2-8.

4

Plug the input device, the PA 300, and the output device into a grounded AC source.

5

Turn on the input and output devices.

Mounting the PA 300

The PA 300 peaking amplifier can be set on a table; mounted on a rack shelf; or mounted through or under a desk, podium, or tabletop.

The following kits are available for mounting the PA 300:

•RSB 129 1U, 9.5" deep basic rack shelf (part #60-604-01)

•RSU 129 1U, 9.5" deep universal rack shelf kit (part #60-190-01)

•RSB 126 1U, 6" deep basic rack shelf

(part #60-604-10)

•RSU 126 1U, 6" deep universal rack shelf kit (part #60-190-10)

•MBU 125 Under-desk mounting kit (part #70-077-01)

•MBD 129 Through-desk mounting kit (part #70-077-02) The following sections provide instructions for these options.

2-2 PA 300 Peaking Amplifier • Installation and Operation