Troubleshooting |
|
Fault with fuse in mains electricity supply. |
|
Plug not inserted in wall socket. |
|
Appliance door not closed properly. |
|
Knob stay at the mark of "RESET" |
|
Water tap not turned on. |
|
Blocked strainer in water intake hose. |
|
- The strainer is situated in the Aquastop or |
|
Caution |
|
Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs |
|
can lead to considerable equipment damage as well as danger to the user. |
|
...with the appliance itself |
|
When the alarm sounds in a series of 2 beeps, pause, 2 beeps, pause ... |
|
the water is turned on and the hose is connected properly; |
|
the water supply to the house is on and has sufficient pressure; |
|
the water supply hose is crimped or bent; |
|
the filter for the water supply hose is clogged. |
|
the drain hose is too low. |
|
When the alarm sounds in a series of 3 beeps, pause, 3 beeps, pause ... |
|
the drain hose is crimped or bent. |
|
the drain hose is too high. |
|
When the alarm sounds in a series of 4 beeps, pause, 4 beeps, pause ... |
|
Temperature sensor failed and call your Authorised Service Center. |
|
When the alarm sounds in a series of 5 beeps, pause, 5 beeps, pause ... |
|
Flood switch has been activated and call you Authorised Service centre. |
|
When the alarm sounds in a series of 6 beeps, pause, 6 beeps, pause ... |
|
the drain hose is too low. |
|
When the "END" indicator is on, at the moment, the alarm sounds in a series of 7 beeps, |
|
pause, 7 beeps, pause ... |
|
the door is not properly closed. |
|
If you take all these checks and the dishwasher still does not function or your dishwasher |
|
have any other error display, you can power the dishwasher OFF, and wait a few minutes. |
|
You can power the dishwasher on, try it again, if the dishwasher still does not function and/ |
|
or the problem persists, contact the nearest authorised service center and provide them |
|
with the following information: | 10 |