Haier HDW9SST, HDW9WHT manual Drain Hose Connection, Electrical Connection

Page 15

Installation

Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink. Use the plastic support that comes with the appliance (see fig .2) and ensure there are no tight bends or kinks. The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

MAX 100

MIN 40

fig.2

Attention:

The plastic hose support must be fastened to the wall to prevent the drain hose from moving.

Electrical Connection

After making sure that the voltage and frequency in the home correspond to those on the rating plate of the appliance (located on the side of the stainless steel inner door) and that the electrical system can cope with the maximum voltage on the rating plate,insert thr plug into an earthed electrical socket.

DO NOT USE ADAPTORS OR EXTENSION LEADS.

14

Image 15
Contents HDW9SST HDW9WHT Index To maintain the Efficiency and Safety of this appliance Safety Is Very ImportantClose-up View Interior Close-up View Control PanelRinse Aid Detergent and Rinse AidDetergent Loading the detergentLoading the Dishwasher Lower rackUpper rack At the end of the wash cycle Cancelling or modifying a wash cycle settingTurning on the Appliance Starting a wash cycleEnergy Saving Tips How to Keep Your Dishwasher in ShapeHeavy Wash Cycle TableTroubleshooting Cleaning and Special MaintenancePause, 7 beeps, pause With the appliance itselfRemnants of detergent stuck inside dispenser During washingRemnants of food are stuck to the dishes, cutlery,etc With the dishes,cutlery, etcCold Water Connection InstallationPositioning the Appliance Levelling the ApplianceElectrical Connection Drain Hose ConnectionDiagram Technical data