Behringer PROMIC2200 manual Safety Instructions

Page 2
SAFETY INSTRUCTIONS

ULTRAGAIN PRO MIC2200

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electrical shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to con- stitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and mainte- nance instructions in the accompanying literature. Read the manual.

DETAILED SAFETY INSTRUCTIONS:

All the safety and operation instructions should be read before the appliance is operated. Retain Instructions:

The safety and operating instructions should be retained for future reference. Heed Warnings:

All warnings on the appliance and in the operating instructions should be adhered to. Follow instructions:

All operation and user instructions should be followed. Water and Moisture:

The appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool etc.).

Ventilation:

The appliance should be situated so that its location or position does not interfere with its proper ventilaton. For example, the appliance should not be situated on a bed, sofa rug, or similar surface that may block the ventilation openings: or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat:

The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliance (including amplifiers) that produce heat.

Power Source:

The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization:

Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. Power-Cord Protection:

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles and the point where they exit from the appliance.

Cleaning:

The appliance should be cleaned only as recommended by the manufacturer. Non-use Periods:

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. Object and Liquid Entry:

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. Damage Requiring Service:

The appliance should be serviced by qualified service personnel when:

-The power supply cord or the plug has been damaged; or

-Objects have fallen, or liquid has been spilled into the appliance; or

-The appliance has been exposed to rain; or

-The appliance does not appear to operate normally or exhibits a marked change in performance; or

-The appliance has been dropped, or the enclosure damaged.

Servicing:

The user should not attempt to service the appliance beyond that is described in the Operating Instructions. All other servicing should be referred to qualifield service personnel.

2

Image 2
Contents ENGLISH ULTRAGAIN PRO MIC2200SAFETY INSTRUCTIONS FOREWORD ULTRAGAIN PRO TABLE OF CONTENTS 1. INTRODUCTION 1.1 Technical background 1.2 The tube used in the ULTRAGAIN PRO Fig. 1.4: triode ULTRAGAIN PRO MIC2200Fig. 1.3 diode Formula for calculating total harmonic distortion k= k22 + k32Fig. 1.5 pentode 2.1 High quality components and design 3. INSTALLATION2. THE DESIGN CONCEPT 2.2 Inputs and outputs3.3 Audio connections 3.1 Rack mounting3.2 Mains voltage 3. INSTALLATIONFig. 4.1 Control elements on the front panel 4. CONTROL ELEMENTS4.1 Front panel control elements 4.2 Rear panel control elements 5. APPLICATIONS Tab. 5.1 Basic setting of the ULTRAGAIN PROULTRAGAIN PRO MIC2200 5.4 The ULTRAGAIN PRO’s parametric equalizer 5.2 The ULTRAGAIN PRO as a level translator5.3 The ULTRAGAIN PRO as a direct-injectionbox 5.5 The ULTRAGAIN PRO as a tube interface ULTRAGAIN PRO MIC2200 6. SPECIFICATIONS6. SPECIFICATIONS ULTRAGAIN PRO MIC2200 7.WARRANTY7. WARRANTY