Haier HDW12-TFE3SS How to keep your dishwasher in shape, After Every Wash, Remove the plug, Seals

Page 17
How to keep your dishwasher in shape

16

How to keep your dishwasher in shape

EN

After Every Wash

After every wash, turn off the water supply the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside.

Remove the plug

Before cleaning or performing maintenance, always switch off the remove the plug from the socket. Do not run risks.

No solvents or Abrasive Cleaning Products

To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, It is recommended that you use only a cloth and warm soapy water.

To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or cleaning product made specifically for dishwashers.

Moving the Appliance

If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can be positioned on its back.

Seals

One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.

The door should not be left in the open position since this could present a tripping hazard.

When You Go on Holiday

When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.

Image 17
Contents 0120504778D Dishwasher HDW12-TFE3SS HDW12-TFE3WH Instructions for UseIndex At time of delivery During installationDuring normal use Safety informationWhen disposing of old appliances If a fault occursIf your family includes children Dangerous voltagePositioning the appliance InstallationLevelling the appliance Cold water connectionElectrical Connection Drain hose connectionDishwasher interior Getting to know your dishwasherClose-up view control panel Rinse aid How to fill rinse aidLoading the rinse aid When the low rinse aid indicator Hon the control panel and the meLoading the detergent How to fill the detergent dispenserDetergent What you should not put into the dishwasher Not suitable for the dishwasherOur recommendation Damage to glassware and other dishesArranging crockery, glasses, etc. in the dishwasher EN How to use the lower rackPull out the rack to load the dishwasher Pots, serving bowls, etc. must always be placed face down. see fig.CKnife rack How to use the upper rackShelf Types of load Programme overviewHEAVY NORMAL QUICK RINSEWashing dishes Switching the dishwasher ONProgramme selection Earn savingsEnd of programme Switching the dishwasher OFFInterrupting the programme Delayed start programmingReset drain function Cancelling or modifying a cycleHALF LOAD Button To select HALF LOADNo solvents or Abrasive Cleaning Products How to keep your dishwasher in shapeWhen You Go on Holiday After Every WashOverall condition of appliance Care and maintenanceRinse-aid FiltersResolving minor problems yourself Trouble ShootingProblems when the appliance is switched on Spray armsHave you checked whether Error display on the time-remaining indicatorRemnants of detergent stuck inside dispenser Lower spray arm rotates with difficultyLid in detergent compartment cannot be closed with the dishes,cutlery, etc during washingWater remains inside appliance after programme has ended Unusual amount of foam is creasedWhite stains are left on crockery, glasses have a milky appearance Plastic items are discolouredDishes,cultlery,etc.have not been dried Glasses have a dull appearanceNotes on waste disposal Technical dataImportant information General information