Haier HDW12-TFE3SS, HDW12-TFE3WH Trouble Shooting, Spray arms, Resolving minor problems yourself

Page 19

Spray arms

18

		EN
	Spray arms
	Lime and remnants of food in the washing water can block the
	nozzles in the spray arms “ 9 ” and “ 10 ” and the arm mountings.
	Inspect the nozzles in the spray arms for blocked holes
	due to remnants of food.	9
	If necessary, pull the lower arm “ 10 ” upwards and lift it off.	9

	Unscrew the upper spray arm “ 9 ”.	10
	Clean both spray arms under running water.
	Refit the spray arms. Ensure that the lower arm has locked
	into place and the upper one is screwed tight.
	Ensure that the power supply is turned off prior to removal
	and cleaning of any internal pars.

Trouble Shooting

Resolving minor problems yourself

Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer.Not only does this save costs,but it also means that the appliance is available for use again that much sooner. The following list of common occurrences and their remedies should help you identify the causes of most problems.

Problems...

...when the appliance is switched on

Appliance does not start up

Fault with fuse in mains electricity supply.

Plug not inserted in wall socket.

Appliance door not closed properly.

Programme button has not been pressed.

Water tap not turned on.

Blocked strainer in water intake hose.

- The strainer is situated in the Aquastop or supply-hose connection.

Caution

Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment dam- age as well as danger to the user.

Image 19

Contents 0120504778D Dishwasher HDW12-TFE3SS HDW12-TFE3WH Instructions for UseIndex Safety information During installationAt time of delivery During normal useDangerous voltage If a fault occursWhen disposing of old appliances If your family includes childrenCold water connection InstallationPositioning the appliance Levelling the applianceElectrical Connection Drain hose connectionClose-up view control panel Getting to know your dishwasherDishwasher interior When the low rinse aid indicator Hon the control panel and the me How to fill rinse aidRinse aid Loading the rinse aidDetergent How to fill the detergent dispenserLoading the detergent Damage to glassware and other dishes Not suitable for the dishwasherWhat you should not put into the dishwasher Our recommendationPots, serving bowls, etc. must always be placed face down. see fig.C How to use the lower rackArranging crockery, glasses, etc. in the dishwasher EN Pull out the rack to load the dishwasherShelf How to use the upper rackKnife rack QUICK RINSE Programme overviewTypes of load HEAVY NORMALEarn savings Switching the dishwasher ONWashing dishes Programme selectionDelayed start programming Switching the dishwasher OFFEnd of programme Interrupting the programmeTo select HALF LOAD Cancelling or modifying a cycleReset drain function HALF LOAD ButtonAfter Every Wash How to keep your dishwasher in shapeNo solvents or Abrasive Cleaning Products When You Go on HolidayFilters Care and maintenanceOverall condition of appliance Rinse-aidSpray arms Trouble ShootingResolving minor problems yourself Problems when the appliance is switched onHave you checked whether Error display on the time-remaining indicatorLid in detergent compartment cannot be closed Lower spray arm rotates with difficultyRemnants of detergent stuck inside dispenser Unusual amount of foam is creased during washingwith the dishes,cutlery, etc Water remains inside appliance after programme has endedGlasses have a dull appearance Plastic items are discolouredWhite stains are left on crockery, glasses have a milky appearance Dishes,cultlery,etc.have not been driedImportant information Technical dataNotes on waste disposal General information