Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall, and the sides along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) of the dishwasher until it is level. In any case, the appliance should not be inclined more than 2°. If the appliance is level, it will help ensure proper performance.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) con- nector and makeing sure that it is fastened tightly in place (see Fig.1).

If the water pipes are new or have not been used for an ex- tended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60.

In this case, the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Anti-Flooding Protection

The dishwasher is equipped with a system that stops the supply of water in the event of a problem with the water supply hose, or leaks within the unit, in order to prevent damage to your home. If for any reason the box containing the electrical components happens to get damaged, remove the plug of the appliance from the socket immediately. In order to guarantee that the anti-flood- ing feature operates properly, the box "A" with the water supply hose must be attached to the water supply tap as shown in Fig.

1.No other type of connection is acceptable. The water supply hose must not, under any circumstances, be cut, as it contains electrical parts which are live. If the length of the hose is not adequate to make a proper connection, the hose must be re- placed with one which is long enough. This hose is available upon request from specialised retailers and service centres.

Fig.1

Installation

Drain Hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see Fig.2). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water.

Fig.2

Attention:

The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety re- quirement mandated by law).

If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug rather than us- ing adapters or the like as they could cause overheating and burns.

.10.

DW12-LBE specifications

Haier, a renowned name in home appliances, has made a significant mark with its innovative dishwasher model, the Haier DW12-LBE. This appliance is designed to elevate the dishwashing experience while ensuring efficiency and convenience in the kitchen.

The Haier DW12-LBE boasts a sleek and modern design that seamlessly integrates into any kitchen decor. Its compact size, measuring just under 60 cm in width, makes it ideal for urban homes or smaller spaces where every inch counts. Despite its compact stature, this dishwasher offers a generous capacity, accommodating up to 12 standard place settings, making it an excellent choice for family meals or entertaining guests.

One of the standout features of the DW12-LBE is its energy efficiency. With an impressive Energy Efficiency Class rating, this model not only reduces electricity consumption but also minimizes water use, making it an environmentally friendly choice. The dishwasher is designed to operate quietly, ensuring a peaceful environment even during cycles, thanks to its low noise level of around 49 dB.

In terms of technology, the Haier DW12-LBE comes equipped with multiple wash programs that cater to various needs. Users can choose from options such as intensive, eco, and quick wash settings, ensuring that dishes come out sparkling clean regardless of the load. The intelligent water softening system is designed to adapt to local water hardness levels, which helps in preventing limescale buildup and prolonging the lifespan of the appliance.

Another notable characteristic is the adjustable upper rack, which provides flexibility when loading larger items, such as pots and pans. The dishwasher also includes a half-load function, allowing users to save time and resources when washing smaller loads. Additionally, the built-in LED display provides clear information on cycle times and selected settings for enhanced user experience.

Safety features are also paramount in the design of the DW12-LBE. With a child lock function, parents can ensure that their little ones remain safe from any accidental operation. Furthermore, the appliance includes a delay start option, allowing users to schedule washes at their convenience.

In summary, the Haier DW12-LBE dishwasher combines modern design, energy efficiency, and versatility, making it a compelling choice for anyone looking to streamline their dishwashing process while maintaining high standards of cleanliness and safety in the kitchen.