Haier DW12-LBE manual L t, Adjusting Salt Consumption, Loading the Salt into the Softener

Page 4

S a l t ￿￿

Salt

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils.

The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level of salt consumption so that it remains at a minimum. Your local Water Board can supply the degree of hardness of the water in your area.

To adjust salt consumption, proceed as follows:

Loading the Salt into the Softener

Always use salt intended for use with dishwashers.

The salt container is located beneath the lower rack and should be filled as follows:

-When the "low salt indicator light" (O) blinks,you must fill the salt.

-Remove the lower rack and then unscrew and remove the cap from the salt container;

-If you are filling the container for the first time, fill it with water;

-Place the end of the funnel (supplied) into the hole and intro- duce about 2 kg of salt. It is normal for a small amount of water to come out of the salt container.

-Carefully screw the cap back on.

The salt container must be filled when the "low salt" indica-

tor light (located on the control panel) comes on.

To prevent the formation of rust, load the salt just before begin-

ning a wash cycle.

-Unscrew the cap from the salt container;

-There is a ring on the container with an arrow on it (see figure), If necessary, rotate the ring in an anticlockwise direction from the "-" setting towards the "+" sign, based on the hardness of

the water being used.

It is recommended that adjustments be made in accordance with the following scheme:

Water Hardness

 

 

 

 

 

 

 

 

 

 

 

 

 

Selector

Salt

Autonomy

Clarke

 

 

 

￿dH

mmol/l

c o n s u m p t i o n (cycles/2kg)

degrees

position

 

 

(Grams/cycle)

 

0￿14

M￿NT

M￿NIT

L

M

L

NQ￿PS

NU￿QQ

NIU￿QIQ

=?J?

OM

SM

 

 

 

 

 

 

PS￿TN

QR￿UV

QIR￿UIV

jba

QM

QM

 

 

 

 

 

[TN

[UV

[UIV

?H?

SM

OR

 

 

 

 

 

 

.3.

GB

Image 4
Contents DW12-LBE 012050Safety Is a Good Habit to Develop Close-up View Control PanelClose-up View Interior Adjusting Salt Consumption L tSalt Loading the Salt into the SoftenerDetergent and Rinse Aid DetergentLoading the detergent Rinse AidHow to use the lower rack How to use the upper rackLoading the Dishwasher ShelfStarting the Appliance How to Keep Your Dishwasher in Shape Energy Saving TipsWash Cycle Table Cleaning and Special Maintenance TroubleshootingInstallation Installation Diagram

DW12-LBE specifications

Haier, a renowned name in home appliances, has made a significant mark with its innovative dishwasher model, the Haier DW12-LBE. This appliance is designed to elevate the dishwashing experience while ensuring efficiency and convenience in the kitchen.

The Haier DW12-LBE boasts a sleek and modern design that seamlessly integrates into any kitchen decor. Its compact size, measuring just under 60 cm in width, makes it ideal for urban homes or smaller spaces where every inch counts. Despite its compact stature, this dishwasher offers a generous capacity, accommodating up to 12 standard place settings, making it an excellent choice for family meals or entertaining guests.

One of the standout features of the DW12-LBE is its energy efficiency. With an impressive Energy Efficiency Class rating, this model not only reduces electricity consumption but also minimizes water use, making it an environmentally friendly choice. The dishwasher is designed to operate quietly, ensuring a peaceful environment even during cycles, thanks to its low noise level of around 49 dB.

In terms of technology, the Haier DW12-LBE comes equipped with multiple wash programs that cater to various needs. Users can choose from options such as intensive, eco, and quick wash settings, ensuring that dishes come out sparkling clean regardless of the load. The intelligent water softening system is designed to adapt to local water hardness levels, which helps in preventing limescale buildup and prolonging the lifespan of the appliance.

Another notable characteristic is the adjustable upper rack, which provides flexibility when loading larger items, such as pots and pans. The dishwasher also includes a half-load function, allowing users to save time and resources when washing smaller loads. Additionally, the built-in LED display provides clear information on cycle times and selected settings for enhanced user experience.

Safety features are also paramount in the design of the DW12-LBE. With a child lock function, parents can ensure that their little ones remain safe from any accidental operation. Furthermore, the appliance includes a delay start option, allowing users to schedule washes at their convenience.

In summary, the Haier DW12-LBE dishwasher combines modern design, energy efficiency, and versatility, making it a compelling choice for anyone looking to streamline their dishwashing process while maintaining high standards of cleanliness and safety in the kitchen.