SERVICE AND ADJUSTMENTS

BELT INSTALLATION -

Work belt around both mandrel pulleys and idler pulleys.

Make sure belt is in all pulley grooves and inside all belt guides.

Install mower (See "To Install Mower" in this section of manual).

MANDREL

IDLER PULLEYS

 

PULLEY

 

MANDREL

PULLEY

FIG. 22

TO ADJUST BRAKE (See Fig. 23)

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-3/4", loosen jam nut and turn nut “A” until distance becomes 1-3/4". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING BRAKE “ENGAGED”

1-3/4"

NUT “A”

JAM NUT

OPERATING

ARM

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUSTMENT IS NECESSARY CONTACT YOUR NEAR- EST AUTHORIZED SERVICE CENTER/DEPARTMENT

FIG. 23

22

TO REPLACE MOTION DRIVE BELT (See Fig. 24)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

Remove mower (See “TO REMOVE MOWER” in this section of this manual.)

Disconnect clutch wire harness.

Remove clutch locator.

Remove belt from stationary idler and clutching idler.

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

Pull belt toward front of tractor and remove downwards from around electric clutch.

Install new belt by reversing above procedure.

ELECTRIC

CLUTCH LOCATOR

CLUTCH

 

CLUTCHING

 

IDLER

 

STATIONARY

 

IDLER

 

TRANSMISSION

 

INPUT PULLEY

 

 

CLUTCH

 

WIRE HARNESS

FIG. 24

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See “PURGE TRANSMIS- SION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

Page 22
Image 22
Poulan PR20PH42STA To Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, Transmission REMOVAL/REPLACEMENT

PR20PH42STA specifications

The Poulan PR20PH42STA is a robust lawn mower that has garnered attention for its impressive performance and user-friendly features. Designed for both residential and light commercial use, this mower stands out in the competitive market for its durability and efficiency.

One of the standout features of the Poulan PR20PH42STA is its powerful engine. Equipped with a reliable 20 horsepower engine, it provides ample power to tackle various mowing conditions, ensuring a clean and even cut across diverse terrains. The mower’s cutting deck measures 42 inches, allowing it to cover a substantial amount of ground in each pass, which is ideal for medium to larger-sized yards.

The PR20PH42STA also employs a hydrostatic transmission system, which offers seamless gear shifts and an easy-to-control speed. This feature is particularly beneficial for users seeking a mowing experience that does not require frequent stopping to adjust speeds, making it ideal for navigating around obstacles such as trees and flower beds.

Another impressive aspect of this mower is its adjustable cutting height. With various height settings, users can customize the lawn's finish to their preference, from a close trim to a higher cut that promotes grass health. This versatility allows homeowners to adapt to seasonal conditions and grass types, ensuring an aesthetically appealing lawn throughout the year.

In terms of design, the Poulan PR20PH42STA boasts a comfortable and ergonomic seating arrangement that enables users to mow for extended periods without fatigue. The easy-to-reach controls contribute to a user-friendly interface, making it accessible to both seasoned users and those new to lawn care.

The mower also features a mulching capability, which not only enhances the health of the lawn by returning nutrients but also eliminates the need for bagging clippings. Users can expect a neat finish while promoting an eco-friendly approach to lawn maintenance.

Durability is another key characteristic of the Poulan PR20PH42STA. Constructed with high-quality materials, it is designed to withstand the rigors of regular use, ensuring longevity and reliability.

In conclusion, the Poulan PR20PH42STA combines power, versatility, and comfort, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its array of features and user-friendly design, this mower is well-equipped to handle the demands of lawn care, ensuring a healthy and beautifully manicured landscape.