OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 7)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•Remove retainer spring and clevis pin which secure each gauge wheel bar.

•Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pin. Gauge wheels should be slightly off the ground.

•Replace retainer spring into clevis pin.

•Be sure all gauge wheels are in the same setting.

IMPORTANT: BE SURE TO READJUST GAUGE WHEELS IF YOU CHANGE THE CUTTING HEIGHT OF THE MOWER DECK.

RETAINER

SPRING

CLEVIS

PIN

FIG. 7

TO OPERATE MOWER (See Fig. 8)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Lower mower with attachment lift control.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

ATTACHMENT CLUTCH

ATTACHMENT

SWITCH PULL OUT TO

LIFT LEVER

"ENGAGE"

HIGH

 

POSITION

 

LOW

 

POSITION

PUSH IN TO

 

"DISENGAGE"

 

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowly depress appropriate drive pedal to slowest set- ting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 5 and 9)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

FIG. 9

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

FIG. 8

13

 

Page 12 Page 14
Page 13
Image 13
Poulan PR20PH42STA To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Operate on Hills, To Transport See Figs
Page 12 Page 14

PR20PH42STA specifications

The Poulan PR20PH42STA is a robust lawn mower that has garnered attention for its impressive performance and user-friendly features. Designed for both residential and light commercial use, this mower stands out in the competitive market for its durability and efficiency.

One of the standout features of the Poulan PR20PH42STA is its powerful engine. Equipped with a reliable 20 horsepower engine, it provides ample power to tackle various mowing conditions, ensuring a clean and even cut across diverse terrains. The mower’s cutting deck measures 42 inches, allowing it to cover a substantial amount of ground in each pass, which is ideal for medium to larger-sized yards.

The PR20PH42STA also employs a hydrostatic transmission system, which offers seamless gear shifts and an easy-to-control speed. This feature is particularly beneficial for users seeking a mowing experience that does not require frequent stopping to adjust speeds, making it ideal for navigating around obstacles such as trees and flower beds.

Another impressive aspect of this mower is its adjustable cutting height. With various height settings, users can customize the lawn's finish to their preference, from a close trim to a higher cut that promotes grass health. This versatility allows homeowners to adapt to seasonal conditions and grass types, ensuring an aesthetically appealing lawn throughout the year.

In terms of design, the Poulan PR20PH42STA boasts a comfortable and ergonomic seating arrangement that enables users to mow for extended periods without fatigue. The easy-to-reach controls contribute to a user-friendly interface, making it accessible to both seasoned users and those new to lawn care.

The mower also features a mulching capability, which not only enhances the health of the lawn by returning nutrients but also eliminates the need for bagging clippings. Users can expect a neat finish while promoting an eco-friendly approach to lawn maintenance.

Durability is another key characteristic of the Poulan PR20PH42STA. Constructed with high-quality materials, it is designed to withstand the rigors of regular use, ensuring longevity and reliability.

In conclusion, the Poulan PR20PH42STA combines power, versatility, and comfort, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its array of features and user-friendly design, this mower is well-equipped to handle the demands of lawn care, ensuring a healthy and beautifully manicured landscape.
Top Page Image Contents