Hoshizaki HR24A I. Installation Instructions, A.Checks Before Installation, B. Location, General

Page 6
I. Installation Instructions

I. Installation Instructions

A.Checks Before Installation WARNING

This unit must be installed in accordance with applicable national, state, and local codes and regulations.

This unit is heavy. Use care when lifting or positioning. Work in pairs when needed to prevent injury or damage.

Do not tilt the unit more than 45°.

A.Checks Before Installation

Visually inspect the exterior of the shipping package and immediately report any damage to the carrier. Upon opening the package, any concealed damage should also be immediately reported to the carrier.

Remove the shipping carton, tape, and packing material. Also remove the protective plastic film from both the exterior panels and the interior door panel. If the unit is exposed to the sun or to heat, remove the film after the unit cools.

Remove all accessory containers before discarding the packing materials.

B. Location

1. General

This unit is approved for indoor or outdoor use.

NOTICE

Normal operating ambient temperature must be within 61°F to 95°F (16°C to 35°C). Operation of the unit, for extended periods, outside of this normal temperature range may affect unit performance.

For best operating results:

The unit should not be located next to ovens, grills, or other high heat producing equipment.

The location should provide a firm and level foundation for the unit.

The unit should not be located in a corrosive environment.

The unit must have a minimum of 1" (3 cm) clearance at bottom and top. Air must be able to circulate freely under, behind, and above the unit.

6

Image 6
Contents Undercounter Refrigerator Model HR24A INSTRUCTION MANUALHoshizakiHoshizaki America, Inc E-mail:techsupport@hoshizaki.com •Complete and detailed explanation of the problemPhone: 1-800-233-1940;770 Fax: 1-800-843-1056;770 HOSHIZAKI AMERICA, INC 618 Highway 74 SouthCONTENTS serious injury Important Safety InformationNOTICE propertyWARNING, continued B. Location I. Installation InstructionsA.Checks Before Installation 1. GeneralBetween a Cabinet and 2. Built-InInstallation SiteBetween Two Cabinets the End of a CounterC. Door Reversal Fig.2.Install the Top Trim D. Setup1.Install the Toe Kick 4. Adjust the ShelvesE. Electrical Connection F. Final Checklist II. Operating Instructions A. Important Notes About UsageC.Cabinet Temperature 2. Adjusting the Temperature SetpointB. Startup 1. Temperature DisplayE. Alarm Safeties D. Display IconsH. Defrost F.Control Panel LockoutG. Door Lock 1. Automatic DefrostK.Power Outage I. Cooling PerformanceJ.Cabinet Condensation 2. Cabinet Interior A. Cleaning1.Exterior 3. Door GasketB. Maintenance 2. Power Supply Connection1. Condenser IV. Preparing the Unit for Periods of Non-Use A. Shutdown and Long StorageB.Disposal HOSHIZAKI AMERICA, INC
Related manuals
Manual 39 pages 40.2 Kb

HR24A specifications

The Hoshizaki HR24A is an advanced refrigeration unit designed to meet the cooling needs of commercial kitchens and food storage facilities. Known for its reliability and efficiency, this model showcases several innovative features that set it apart in the competitive market of commercial refrigeration.

One of the standout characteristics of the Hoshizaki HR24A is its robust construction. Built with a durable stainless steel exterior, it not only adds aesthetic appeal but also ensures longevity and resistance to corrosion and wear. The interior is designed for easy cleaning, with rounded corners that minimize the buildup of grime and food particles.

The HR24A offers an impressive storage capacity, making it ideal for establishments with high-volume food storage requirements. With a temperature range typically between 33°F and 38°F, the unit maintains optimal conditions for preserving perishables such as meats, dairy, and vegetables. This precision in temperature control is essential for maintaining food safety and quality.

One of the key technologies integrated into the Hoshizaki HR24A is its advanced refrigeration system. Utilizing a highly efficient compressor and a fan-assisted cooling feature, the unit ensures rapid temperature recovery even in busy kitchen environments. This is crucial during peak hours when door openings are frequent, as it helps maintain consistent internal temperatures.

Energy efficiency is another hallmark of the HR24A. It is designed with environmentally friendly refrigerants and complies with Energy Star standards, which can lead to significant cost savings over time through reduced electricity consumption. This commitment to environmental responsibility makes it an attractive option for eco-conscious businesses.

In terms of user-friendliness, the HR24A is equipped with digital controls and adjustable shelving, allowing for customized organization according to specific storage needs. The LED lighting inside the unit provides excellent visibility, making it easy to locate items quickly, which is particularly beneficial during busy service periods.

Overall, the Hoshizaki HR24A combines durability, efficiency, and functionality, making it an exceptional choice for anyone seeking a reliable refrigeration solution in a commercial kitchen setting. Whether used in restaurants, hotels, or catering businesses, its impressive features and state-of-the-art technology continue to meet the demanding requirements of the foodservice industry.