GAS Leak TEST-CSG, Gas Pressure-Cs | Henny Penny CSL, CSB, CSM

Installation – Gas Units (continued)

CSG GAS SUPPLY (continued)

A steam burner gas valve and dry heat burner gas valve respectively are responsible for the gas supply to the indi- vidual burners. The Combi-Steamer models CSG have manual shut-off valves, that can be reached from the front without tools.

The manual shut-off valves of these units are located behind the service cover under the operator panel. To oper- ate the valves, unscrew the 2 knurled screws and pull the service cover off.

GAS LEAK TEST-CSG

After the piping and fittings have been installed, check for gas leaks. A simple checking method is to turn on the gas and brush all connections with a soap solution. If bubbles occur, it indicates escaping gas. In this event, the piping connection must be redone.

Never use a lighted match or open flame to test for gas leaks. Escaping gas could cause an explosion resulting in severe personal injury and/or property damage.

GAS PRESSURE-CS

The gas pressure should be measured when all other gas appliances in the kitchen are on high flame. The mini- mum and maximum incoming line flow pressures should be as follows:

Natural: 7-11” water column

Propane: 11” water column

During pressure testing note the following:

1.The Combi-Steamer and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressure in excess of 1/2 psig (3.45 kPa). Turn OFF main gas shut-off valve or main gas supply line.

2.The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressure equal to or less than 1/2 psig (3.45 kPa).

3.If incoming w.c pressure is over 14” w.c. a separate regulator must be installed before the manual gas shut-off valve.

CSM, CSL, CSB specifications

Henny Penny is a leading manufacturer of high-quality cooking equipment, particularly known for their innovative frying, cooking, and food holding solutions. With a commitment to advancing food technology, Henny Penny has established a strong reputation in the commercial kitchen industry, serving foodservice operators worldwide.

One of the standout products in Henny Penny's lineup is their pressure fryer, which is designed to deliver perfectly cooked, moist chicken while reducing cooking times significantly. The patented design ensures even heat distribution and improved oil life, making it a favorite among quick-service restaurants and fast-food establishments.

Henny Penny’s combi ovens also contribute to their acclaim, combining steam and convection cooking to enhance versatility in food preparation. These ovens are equipped with advanced programming options that allow chefs to produce a wide variety of dishes with precise control over temperature and humidity levels, ensuring consistent results. The efficiency of these ovens supports sustainability efforts by reducing energy consumption while maintaining food quality.

Additionally, the Henny Penny SmartConnect technology enhances operational efficiency by allowing kitchen equipment to connect to a centralized management system. This feature enables real-time monitoring and analytics, helping operators optimize their cooking processes, reduce waste, and maintain quality control.

Henny Penny is also committed to safety and ease of use in their designs. Many of their fryers come with built-in filtration systems that automatically clean and extend the life of cooking oil, while user-friendly interfaces make it easy for staff to operate the equipment with minimal training.

Moreover, Henny Penny places a high priority on durability. Their equipment is constructed with robust materials and is rigorously tested to withstand the demanding conditions of busy commercial kitchens. This focus on quality craftsmanship ensures that their products provide reliable performance over many years of service.

In summary, Henny Penny’s dedication to innovation, efficiency, and durability in cooking equipment has positioned them as a frontrunner in the foodservice industry. Their combination of advanced technologies, user-centric designs, and commitment to sustainability make them a trusted choice for operators seeking to enhance their culinary operations while maintaining the highest standards of quality.