Floor Units | Henny Penny CSM, CSB, CSL specification

CSL CSM CSB

Installation – Electric Units (continued)

Floor Units:

NOTE: Adequate clearance must be provided for servicing and for operation.

Minimum clearances have to be maintained from the adjacent walls.

	Left Side	Right Side	Back Side
CSB, CSM, CSL-20, 40	14” (350mm)	2” (50mm)	2” (50mm)

Place the combi-steamer on a level and sturdy surface. Minor unevenness of the surface/floor can be compensat- ed by adjusting the legs of the appliance (+-15mm).

NOTE: The unit must be fixed to the floor to prevent moving when pushing oven racks into unit.

The oven rack must be positioned vertically in the unit, not tilting.

For minor unevenness in floor, the oven rack can be leveled using the optional leveling device. If necessary, con- struct ramps to level floor in front of units.

The weights of the units are as follows: CSB, CSM, CSL-20 764 lbs. (345.5 kg) CSB, CSM, CSL-40 1066 lbs. (483.5 kg)

Installation planning should encourage sufficient space for an additional roll-in rack at the left-hand side of the unit.(20 pan - 29”, 40 pan - 52”)

When moving the unit with a pallet jack, ensure it is located under the 1-5/8” x 1-5/8” structuring frame before lift- ing unit.

Do Not support the unit at the service door. Damage to the unit will result.

CSM, CSL, CSB specifications

Henny Penny is a leading manufacturer of high-quality cooking equipment, particularly known for their innovative frying, cooking, and food holding solutions. With a commitment to advancing food technology, Henny Penny has established a strong reputation in the commercial kitchen industry, serving foodservice operators worldwide.

One of the standout products in Henny Penny's lineup is their pressure fryer, which is designed to deliver perfectly cooked, moist chicken while reducing cooking times significantly. The patented design ensures even heat distribution and improved oil life, making it a favorite among quick-service restaurants and fast-food establishments.

Henny Penny’s combi ovens also contribute to their acclaim, combining steam and convection cooking to enhance versatility in food preparation. These ovens are equipped with advanced programming options that allow chefs to produce a wide variety of dishes with precise control over temperature and humidity levels, ensuring consistent results. The efficiency of these ovens supports sustainability efforts by reducing energy consumption while maintaining food quality.

Additionally, the Henny Penny SmartConnect technology enhances operational efficiency by allowing kitchen equipment to connect to a centralized management system. This feature enables real-time monitoring and analytics, helping operators optimize their cooking processes, reduce waste, and maintain quality control.

Henny Penny is also committed to safety and ease of use in their designs. Many of their fryers come with built-in filtration systems that automatically clean and extend the life of cooking oil, while user-friendly interfaces make it easy for staff to operate the equipment with minimal training.

Moreover, Henny Penny places a high priority on durability. Their equipment is constructed with robust materials and is rigorously tested to withstand the demanding conditions of busy commercial kitchens. This focus on quality craftsmanship ensures that their products provide reliable performance over many years of service.

In summary, Henny Penny’s dedication to innovation, efficiency, and durability in cooking equipment has positioned them as a frontrunner in the foodservice industry. Their combination of advanced technologies, user-centric designs, and commitment to sustainability make them a trusted choice for operators seeking to enhance their culinary operations while maintaining the highest standards of quality.