Extron electronic DVI DL 201 Rx Setup Guide -­ DVI DL 201 Tx/Rx cont’d, Troubleshooting

Page 2

Setup Guide —­ DVI DL 201 Tx/Rx (cont’d)

d. Press and release the EDID “Store” button (see the figure at right). The

EDID

rear panel LED turns amber while the EDID information is read and

STORE

stored from the local monitor. Afterwards, the LED turns green.

 

e.Power off and disconnect the display from the transmitter.

f.Connect the transmitter to the receiver.

g.Connect a source device to the transmitter.

h.Connect a display device to the receiver and, if required, a local monitor to the transmitter.

i.Power on the display device(s), the transmitter, and the receiver.

j.Power on the source device.

Option 2 — To use the default EDID (2560x1600 @ 60 Hz):

a.Configure the DDC switches as shown in the figure at right.

b.Connect a source device to the transmitter.

c.Connect a display device to the receiver and, if required, a local monitor to the transmitter.

d.Connect the transmitter and receiver.

e.Power on the transmitter, receiver, and display devices.

f.Power on the source device.

Option 3 — To use DDC pass-through routed to the local monitor:

a.Configure the DDC switches as shown in the figure at right.

b.Connect a source device to the transmitter.

c.Connect a display device to the receiver and, if required, a local monitor to the transmitter.

d.Connect the transmitter and receiver.

e.Power on the transmitter, receiver, and local monitor.

f.Power on the source device.

g.Power on the display device.

 

EDID MINDER

DEFAULT EDID

REMOTE DDC

ON ON

 

 

OFF

1

2

3

 

 

 

 

EDID MINDER

DEFAULT EDID

REMOTE DDC

ON ON

 

 

OFF

1

2

3

 

 

 

Option 4 — To use DDC pass-through routed to the remote display:

a.Configure the DDC switches as shown in the figure at right.

b.Connect a source device to the transmitter.

c.Connect a display device to the receiver and, if required, a local monitor to the transmitter.

d.Connect the transmitter and receiver.

e.Power on the transmitter, receiver, and display devices.

f.Power on the source device.

 

EDID MINDER

DEFAULT EDID

REMOTE DDC

ON ON

 

 

OFF

1

2

3

 

 

 

Troubleshooting

For complete instructions, consult the User’s Manual, which is available at the Extron website. If problems are encountered, verify that the cables are routed and connected properly.

If the problems persist, contact the Extron Service Department.

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500 +1.714.491.1517 FAX

Extron USA - East

Extron Europe

Extron Asia

Extron Japan

+800.633.9876

+800.3987.6673

+800.7339.8766

+81.3.3511.7655

Inside USA / Canada Only

Inside Europe Only

Inside Asia Only

+81.3.3511.7656 FAX

+1.919.863.1794

+31.33.453.4040

+65.6383.4400

 

+1.919.863.1797 FAX

+31.33.453.4050 FAX

+65.6383.4664 FAX

 

© 2010 Extron Electronics. All rights reserved.

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568 +86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

68-1531-50

Rev. A

01 10

Image 2
Contents Extron DVI DL 201 Tx Setup Guide -­ DVI DL 201 Tx/RxStep Extron DVI DL 201 RxExtron Electronics. All rights reserved Setup Guide -­ DVI DL 201 Tx/Rx cont’dTroubleshooting
Related manuals
Manual 48 pages 14.35 Kb

DVI DL 201 TX/RX, DVI DL 201 Rx specifications

Extron Electronics is renowned for its high-quality audio-visual solutions, and their DVI DL 201 TX/RX and DVI DL 201 RX are no exception. These devices are designed to facilitate digital video signal transmission over long distances, making them ideal for professional AV setups in educational institutions, corporate environments, and large venues.

The Extron DVI DL 201 TX (transmitter) and DVI DL 201 RX (receiver) feature advanced technology that supports DVI Dual Link video signals. This capability allows for the transmission of high-resolution video up to 2560x1600 at 60Hz, ensuring crisp and clear visuals essential for modern presentations and video playback.

One of the standout features of the DVI DL 201 series is its ability to extend DVI signals up to 200 feet (60 meters) using a single CAT 6 cable. This long-distance capability is particularly beneficial in expansive installations where traditional cabling may not suffice. The use of Exton’s advanced technology allows these devices to maintain signal integrity even at longer distances, mitigating concerns about video degradation.

The DVI DL 201 TX/RX is equipped with hot-plug detection, ensuring that both the transmitter and receiver can automatically recognize connected devices without the need for manual intervention. This enhances ease of use and simplifies the setup process for system integrators. Additionally, the devices are designed with a compact form factor, allowing for flexibility in installation without taking up excessive space.

Another notable characteristic of the DVI DL 201 series is its compatibility with a range of DVI sources and displays, making it a versatile solution in mixed technology environments. This flexibility, combined with their durability, makes these devices a reliable choice for any AV installation.

Furthermore, Extron incorporates thorough engineering in their products, ensuring that both the DVI DL 201 TX and RX meet high standards of performance and reliability. The devices are backed by Extron’s comprehensive support and warranty services, providing peace of mind for end-users.

In conclusion, the Extron DVI DL 201 TX/RX and DVI DL 201 RX introduce a robust solution for extending DVI signals, ensuring high-quality video transmission across considerable distances. With their advanced features and technologies, they are an excellent choice for any professional AV application.