Hoshizaki KML-450MAH, KML-450MWH instruction manual Set Up, Electrical Connection

4. SET UP

1)Unpack the Storage Bin, and attach the four adjustable legs provided (bin accessory) to the bottom of the Storage Bin.

2)Position the Storage Bin in the selected permanent position.

3)Place the icemaker on the top of the Storage Bin.

4)Secure the icemaker to the Storage Bin, by

using the two Universal Braces and the two bolts provided. See Fig. 2

5) Level the icemaker/Storage Bin in both the left-to-right and front-to-rear directions. Adjust the Ice Bin Legs to make the icemaker level.

6) Replace the panels in their correct positions.

Fig. 2

5. ELECTRICAL CONNECTION

WARNING

1.Electrical connection must be made in accordance with the instructions on the “WARNING” tag, provided with the pig tail leads in the Junction Box.

2.This icemaker requires a ground that meets the national and local electrical code requirements. To prevent possible electrical shock to individuals or extensive damage to the equipment, install a proper ground wire to the icemaker.

•The white lead must be connected to the neutral conductor of the power source. Miswiring results in severe damage to the icemaker. See Fig. 3.

•This icemaker must have a separate power supply or receptacle of proper capacity. See the Nameplate.

•The opening for the power supply connection is 7/8" diameter to fit a 1/2" trade size conduit.

•Usually an electrical permit and services of a licensed electrician are required.

Fig. 3

10