Initial Preparation

Warning: To prevent damage to machine, boiler must be filled with water before turning main power switch on.

1.Before operating the machine, please read the operation and instruction manual.

2.Needed for installation:

•Access to cold water line with minimum of 30 P.S.I. pressure, drain, and heavy-duty grounded receptacle with its own breaker. Models 2450 & 1750 use 115V, 20 AMP receptacle. Q models use 230V (3 wire plus ground), 20 AMP receptacle. E models use 230V, 15 AMP receptacles with proper plug installed by customer.

•1/4” copper tubing

•(4) 1/4” female flare fittings

•In-line water filter system*

•3/4” ID flexible drain hose

3.Remove machine from carton and position machine in operating location.

4.At this point, please refer to Installation Instructions on Page 6.

5.If there is a problem, consult the Troubleshooting Guide in this manual.

6.If you cannot correct a problem, call Grindmaster Corporation’s Hotline for help at 800-695-4500 or +1-502-425-4776, Monday through Friday, 8 A.M. until 8 P.M., EST.

IMPORTANT

Failure to use in-line water

filter voids warranty!

*Required to validate warranty. (See warranty for details).

Page 3

Espressimo 2450 & 1750 Espresso Cappuccino Machines