Remote Condenser | Installation |
Electrical Connections
1.The icemaker and the remote condenser both require a solid earth ground that meets National, State and Local Codes.
2.Reference the ice machine and condenser date plate for current requirements to determine wire size for electrical hook up.
3.Make sure the supply voltage is the same as the rated voltage shown on the nameplate.
4.Reference wiring diagram below for proper connections.
INSTALLATION NOTICE:
THE “VRC” SERIES REMOTE CONDENSER MAY ONLY BE USED
WITH COMPATIBLE ICE-O-MATIC ICE MAKERS
Electrical shock and/or injury from moving parts inside this machine can cause serious injury. Disconnect electrical supply voltage to the machine and condenser prior to performing any adjustments or repairs.
Page 6