Manitowoc Ice QM30 manual Safety Notices, Procedural Notices, Read These Before Proceeding

Page 2

Safety Notices

As you work on Manitowoc equipment, be sure to pay close attention to the safety notices in this manual. Disregarding the notices may lead to serious injury and/ or damage to the equipment.

Throughout this manual, you will see the following types of safety notices:

!Warning

Text in a Warning box alerts you to a potential personal injury situation. Be sure to read the Warning statement before proceeding, and work carefully.

!Caution

Text in a Caution box alerts you to a situation in which you could damage the equipment. Be sure to read the Caution statement before proceeding, and work carefully.

Procedural Notices

As you work on Manitowoc equipment, be sure to read the procedural notices in this manual. These notices supply helpful information which may assist you as you work.

Throughout this manual, you will see the following types of procedural notices:

Important

Text in an Important box provides you with information that may help you perform a procedure more efficiently. Disregarding this information will not cause damage or injury, but it may slow you down as you work.

NOTE: Text set off as a Note provides you with simple, but useful, extra information about the procedure you are performing.

Read These Before Proceeding:

!Caution

Proper installation, care and maintenance are essential for maximum performance and trouble- free operation of your Manitowoc equipment. Read and understand this manual. It contains valuable care and maintenance information. If you encounter problems not covered by this manual, do not proceed, contact Manitowoc Foodservice Group. We will be happy to provide assistance.

Important

Routine adjustments and maintenance procedures outlined in this manual are not covered by the warranty.

!Warning

PERSONAL INJURY POTENTIAL

Do not operate equipment that has been misused, abused, neglected, damaged, or altered/modified from that of original manufactured specifications.

NOTE: SAVE THESE INSTRUCTIONS.

We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents QM30 UnderCounter Model Ice Machines Read These Before Proceeding Safety NoticesProcedural Notices Personal Injury PotentialWater Supply and Drain Line SIZING/CONNECTIONS …………… Table of ContentsSequence of Operation Initial START-UP or START-UP After Automatic SHUT-OFF ……General ……………………………………………………………………… Cleaning and Sanitizing Procedure ………………………………Removal from Service/Winterization Part Number 000001772 07/08Model/Serial Number Location Model/Serial Number LocationSection Owner Warranty Registration CardGeneral Information Section General InformationThis page Intentionally Left Blank Dimensions GeneralIce Machine Heat of Rejection Installation InstructionsLocation of Ice Machine Leveling the Ice MachineVoltage Installation InstructionsElectrical Service FUSE/CIRCUIT BreakerElectrical Cord Strain Relief Strain Relief InstallationTerminal Block Wire Connection Terminal Block ConnectionsDrain Connections Water Service/DrainsWater Supply Water Supply and Drain Line SIZING/CONNECTIONSTypical Water Supply and Drain Line Sizing and Connections Initial START-UP or START-UP After Automatic SHUT-OFF Operation Ice Thickness AdjustmentIce Thickness Adjustment Dial Correct Ice Bridge ThicknessQM30 45 ml Interior Cleaning and SanitizingCleaning and Sanitizing Procedure Remove the Overflow TubeRemoving the Water Pump Remove the Water Trough MaintenanceRemove the Water Pump Maintenance Exterior CleaningRemoval from Service/Winterization Removing the FilterChecklist Problem Possible Cause To CorrectBefore Calling for Service
Top Page Image Contents