Connection To Main Power Supply, Figure F

Installation (cont.)

4.) Installing the Top Lid Merchandiser (requires Phillips head screwdriver)

•Unplug the cord to the lid and remove the lid from the machine.

•On top of the cover, remove the 4 hole plugs over the front (2) screws, middle (near rocker switch) and back screws then remove these 4 screws with a Phillips head screwdriver. Remove the black top part of the cover from the clear plastic base. (see fig. E)

•Slide the merchandiser header around the outside edge of the lid’s clear plastic base. Position bottom edge of header in grooved area. (see fig. F)

•Reassemble the black top cover onto the clear plastic base. The top edge of header should slide into black top cover grooved area. (see fig. F) Replace screws. Replace hole plugs (the angled plugs goes in the rear hole, and the two large plugs go in the two front holes and the small plug goes in the center hole by the rocker switches).

•Replace assembled lid on machine and reattach cord.

5.Installing the Rear Back-lit Merchandiser

•To remove any existing artwork, bend or pinch the middle of the back-lit merchandiser and pull it from the rear merchandising display casing. (see fig. G)

•To insert new art, slide the left corner edges into the left top and bottom casing edges. (see fig. H)

•Slightly bend art and insert the right side of art into the right top and bottom casing edges. (see fig. H)

•Smooth out art until all edges are properly inserted into the casing.

(Figure E)

(Figure F)

(Figure G)

(Figure H)

Connection To Main Power Supply

!Attention: Before inserting the plug into the electrical outlet, carefully read the following precautions.

•The electrical safety of this Granita machine can only be achieved if the machine is properly connected to an appropriate grounded, electrical receptacle that is in compliance with current national safety stan- dards. Therefore, the manufacturer cannot be held responsible for damage and/or injury caused by fail- ure to connect the unit to an appropriate source of power.

•For a safe and correct installation, connect the unit to a dedicated outlet.

•Do not alter the cord or plug in any way.

!Attention: Altering the cord or plug will void the warranty.

•The entire length of the power supply cord must not, in any way, be compressed (bent or bunched together) nor may extension cords be used.

•Do not obstruct the ventilation and heat dispersion grill vents on the side and rear panels of the unit. An insufficient ventilation process may reduce the efficiency of the machine, causing it to function inade- quately, and cause serious damage to the machine. A minimum of eight inches (20cm) clearance is necessary on each side and behind the unit.

G & MG Series Granita Machine	Page 3

G23-2B, G235-2B, G236-2B, MG235-2B, MG23-2B specifications

The Grindmaster lineup, which includes models MG236-2B, MG23-2B, G236-2B, G23-2B, and MG235-2B, represents a significant advancement in commercial coffee grinding technology. These machines are designed for high-performance grinding capabilities in coffee shops, cafes, and other businesses that require consistent and efficient results.

One of the defining features of the Grindmaster MG236-2B and its counterparts is their superior grinding consistency. Each model is engineered to produce uniform particle sizes, which is essential for optimal extraction during brewing. This consistency not only enhances flavor but also ensures that customers receive a high-quality coffee experience every time.

These machines are equipped with advanced grinding technology, including high-quality burr grinders that effectively reduce heat generation during operation. This is critical as excessive heat can negatively impact the flavor and aroma of the coffee beans. The functionality focused on maintaining the integrity of the coffee's essential oils, allowing baristas to extract the best flavors from their beans.

Durability is another hallmark of the Grindmaster MG series. Made from robust materials and designed for heavy-duty use, these grinders can withstand the rigors of a busy commercial environment. The models are also easy to clean and maintain, featuring accessible components that simplify routine servicing.

User-friendliness is considered in their design. Each model comes with intuitive controls that allow baristas to adjust grind settings easily. This flexibility helps in catering to various brewing methods, from fine grinds for espresso to coarser settings for French press or pour-over brewing.

Moreover, the Grindmaster MG236-2B and similar models are designed to minimize noise during operation, which is a crucial feature for maintaining a pleasant atmosphere in customer-facing environments.

In addition to these personal features, the Grindmaster lineup also emphasizes energy efficiency. The machines are designed to consume minimal power without compromising performance, making them a cost-effective choice for businesses aiming at sustainability.

Overall, the Grindmaster MG236-2B, MG23-2B, G236-2B, G23-2B, and MG235-2B models represent cutting-edge technology in coffee grinding. Their combination of consistency, durability, user-friendliness, and energy efficiency makes them ideal for any coffee-centric business looking to elevate their brewing game and provide an exceptional coffee experience for their customers.