GE Monogram ZXR859, ZXR858 Install Ceiling Support Structure, Mount Template, Finish the Ceiling

Page 6
Front of Hood

Installation Preparation

INSTALL CEILING

SUPPORT STRUCTURE

At the hood location, install 2 x 4 cross framing between ceiling joists as shown.

The 2 x 4 cross framing can be installed standing or flat. See illustration.

8-3/4" Top View of Support Framing

Cross

Framing

*7-5/8"

16"

Joist

 

Typical Support Frame Mounting

The framing should be spaced 8-5/8” on the sides and 7-5/8” at the front from centerline to centerline to accept mounting screws in the vent support frame.

Cross

Framing

Ceiling

8-3/4"

Front of

Hood

Side

ViewSupport

Frame

Note: The cross framing must be spaced 8-3/4" on the side from centerline to centerline in order to accept the hood mounting screws.

Arrange cross framing in the ceiling to suit the existing structure. See examples.

Secure each 2 x 4 block with at least four (4), #10 wood screws, 3″ long (minimum size screws, not

supplied). Use 8 wood screws total for the two supports.

The cross framing must be accurately aligned to assure correct positioning of the hood.

The cross framing must be level in all directions. Check with a spirit level and adjust if necessary.

Cross Framing

Ceiling

8-3/4"

Joist 7-5/8"

 

 

Support

Upper Half

 

Frame

Front

Opening

Of Support

 

Frame

of

 

 

Hood

 

Height

Adjustment

Slot

IMPORTANT: The ceiling structure must be capable of supporting the weight of the hood (approximately 100 pounds) and any inadvertent user contact loads. It is recommended that the hood support frame be supported by a minimum of 2 x 4 cross framing.

Finish the Ceiling

Once the ceiling is finished, mark the location of the ceiling joist and cross framing.

Check to be sure that ceiling is level, use shims if necessary.

1 MOUNT TEMPLATE

Align the template with the marks on the ceiling and tape in place.

Be sure the template is oriented correctly, with the front of the hood.

Use a plumb to be sure the mounting holes will provide parallel alignment with the countertop below.

Center punch all hole locations.

Drill pilot holes in the 4 screw locations. Use a 5/32″ bit and drill approximately 1-1/2″

deep.

Cut wire access hole

approximately 1″ dia.

Wire Access Hole

6

Image 6
Contents Installation Instructions Contents Before YOU Begin25-1/2 Recommended Required AccessoriesProduct Dimensions 35-3/8 27-1/2Tools and Materials Using Duct Cover AccessoriesPower Supply Electrical supplyPlan the Location Check Installation HardwareRemove the Packaging Support frames Charcoal FiltersInstall Ceiling Support Structure Mount TemplateFinish the Ceiling Install Upper Support Frame Install Lower Support FrameCeiling Front Side Support Frames Tape House Wiring Secure WiringSize and Install Ductwork Ceiling Duct ConnectorTop Duct Install Decorative Duct CoversTop Duct Cover Stop Screw Install Stop Screw in One 3 Holes CoverConnect Electrical Install HoodConnector to Align Align DuctUpper Charcoal Filter Slots Lower Grease Install FiltersFinalize Installation Upper Charcoal Filter Slots Grasp Tab Lift and Pull ForwardPub. No

ZXR8510, ZXR858, ZXR859 specifications

GE Monogram has established itself as a leader in luxury kitchen appliances, and the Monogram line of refrigerators, including models ZXR8510, ZXR858, and ZXR859, exemplifies their commitment to performance, design, and innovation. These models are not just appliances; they are the heart of a sophisticated kitchen, equipped with cutting-edge technology that enhances both functionality and aesthetics.

The ZXR8510 is a standout model renowned for its advanced cooling capabilities. Its dual-compressor system ensures optimal temperature control and humidity levels, preserving food freshness longer. This refrigerator features a state-of-the-art water filtration system that provides clean, great-tasting ice and water, while the adjustable shelves and storage bins allow for maximum organization and flexibility in storage. An integrated touch screen controls the refrigerator functions seamlessly, providing easy access to settings and features.

Moving up the line, the ZXR858 model offers an even more sophisticated solution for food preservation. One of its main highlights is the advanced temperature management system, which utilizes precise sensors to create an ideal micro-climate within the refrigerator. This model also includes a smart connectivity feature, allowing users to monitor and control the refrigerator from their smartphones through an intuitive app. In addition, its stainless steel finish and crafted design make it a stunning centerpiece in any modern kitchen.

The ZXR859 takes luxury to the next level with its enhanced design and customization options. This model boasts a broader range of features, including a gourmet ice maker that produces a variety of ice shapes to suit any occasion. With its built-in LED lighting, users can easily view contents, making food selection quick and convenient. The ZXR859 also excels in energy efficiency, meeting rigorous standards while maintaining powerful performance.

In summary, the GE Monogram ZXR8510, ZXR858, and ZXR859 refrigerators exemplify luxury and functionality in the kitchen. Their advanced features, such as dual-compressor systems, smart technology, customizable options, and elegant designs, position them as ideal choices for discerning homeowners. With these models, GE Monogram continues to push the boundaries of appliance innovation, ensuring that every meal preparation experience is a pleasure.