GE Monogram dimensions ZTD910WBWW GE Monogram 30 Warming Drawer

Monogram.™

ZTD910WBWW - GE Monogram 30" Warming Drawer

Single Oven Installation (in inches)

23-1/2" Min.

Inside

Oven

Cutout

Warming Drawer Dimensions (in inches)

27"	23-1/4"
Drawer	9"	10-1/2"
Open
1"	26"	30"
	Including Handle

2x2 or 2x4 Anti-Tip Block Against Rear Wall, 9" From Floor to Bottom of Block

9"

9-1/4"

28-1/2"

1" Min. Above Toekick or Adjust to Oven Installation Height

2" Min.

Allow 5/8" Overlap on All Sides

		Install
		2x4 or 2x2
		Anti-Tip Block
	9"	Against Rear
		Cabinet Wall
23-1/4"	2x4 or 2x2	9" From Floor
		to Bottom
	Runners or Solid Bottom	of Block

10-1/2"	Undercounter Installation (in inches)
		Install	Electrical Outlet 42" Max.
		2x4 or 2x2
30"		Anti-Tip Block	Electrical Outlet	From Right Side.	1-1/2" Cabinet Top
		Against Rear
			Flush With Side
		Cabinet Wall	of Cabinet 7" Max.		25"
		9" From Floor
	Electrical	to Bottom	7"
		of Block
	Outlet 16" Max.
	From Left Side.

Double Oven Installation (in inches)

23-1/2" Min.

Inside

2" Min.*	36"
9"	Countertop

9-1/4"Height

28-1/2"

23-1/2" Min.

	Oven
	Cutout
2x2 or 2x4
Anti-Tip Block
Against Rear
Wall, 9" From
Floor to	9"
Bottom of	9-1/4"
Block
	28-1/2"
	1" Min. Above Toekick

Allow 5/8"

Overlap on

All Sides

2" Min.

23-1/4"

10-1/2"

30"

Note: When installing warming drawer with a cooktop, allow a 2” minimum from cooktop burner box bottom to top of cut-out.

Important Installation Note:

Must provide anti-tip brace at the back of the cabinet and at the top of the cutout.

Optional Accessories:

JXPN1–Optional Pan Set Accessory for Warming Drawer. Five commercial pans with lids (4” deep)

Note: Additional clearance between cutouts may be required. Check to be sure that oven supports above the Warming Drawer location do not obstruct the required interior 23-1/2” depth and 9-1/4” height.

•One large pan (14 quarts)

•Two medium pans (6 quarts each)

•Two small pans (3 quarts each)

ZXD30B–1/4” wood panel trim kit

For answers to your Monogram,®

GE Profile Performance Series,™

GE Profile™ or GE appliance questions, call

GE Answer Center® service, 800.626.2000.

Specification Revised 11/99

Listed by

Underwriters

RLaboratories