Gilson 600MP manual Mixer Transport, Operating the Mixer, Extension Cords for Electric Motors

Page 8

4 – MIXER TRANSPORT

1.Secure drum by engaging drum lock.

2.Secure all moveable parts, including the rear housing.

3.Secure tow pole coupler to vehicle and attach safety chains and hooks. (See FIGURE 2, Safety Chains).

A.Pintle type couplers require the appropriate tow vehicle coupler retainer.

B.Match ball coupler size exactly with hitch ball.

5 – OPERATING THE MIXER

STARTING THE MIXER

Start the mixer engine/motor. Refer to the engine/motor manual for proper starting procedures.

Prior to engaging clutch, lift drum latch from between transport lock blocks. Pull drum to dump position and lower drum latch to horizontal position. Return drum to operating position with transport lock block resting against drum latch lever. (Note: Rotation of paddles will hold drum into drum latch lever. SEE CAUTION DECAL ON MIXING DRUM)

When the engine/motor is warmed up and is running smoothly, move the control lever to the engaged position.

EXTENSION CORDS FOR ELECTRIC MOTORS

The following size extension cords should be used: length of cord, upt to 100 ft.-14 gauge wire; up to 200 feet-12 gauge wire; up to 300 feet-10 gauge wire; up to 400 feet-8 gauge wire.

NOTE: Extension cord must be a 3-wire power cord and 3-wire power plug that is approved for outdoor use. When connecting the power cord, always connect cord to motor first and then plug into a grounded receptacle. When disconnecting the power cord, always unplug the grounded receptacle first.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Gilsjn Mixers Gilsjn MixersIntroduction Table of Contents Safety Precautions Drum While the Mixer is RunningAssembly and PRO-OPERATIONAL Checks Controls and Operations Clutch Control LeverTOW Pole Assembly Saftey ChainsExtension Cords for Electric Motors Mixer TransportOperating the Mixer Discharging the Mixer CleaningLoading the Mixer Trouble Shooting Guide for MP Mixers Drum Seal Housings Operating GuidelinesLubrication Masonry Construction GuidelinesMixing Shaft Bearings Drum Shaft Bearing HangersENGINE/MOTOR Wheel BearingsENGINE/MOTOR Drive AdjustmentRubber Wiper Blades Storage Page Drum & Drive Page Mixing Blades Page Engine Housing and Axle Page FRAME, Drive and Clutch Control Page Engine and Power Options Page Engine and Power Options Gilson Mixer Warranty HOW to Obtain Parts Service Information

600MP specifications

The Gilson 600MP series is a sophisticated line of multi-position magnetic stirrers that have gained a reputation for their exceptional performance and versatility in laboratories around the world. Designed to provide precise and reliable mixing, the Gilson 600MP excels in applications ranging from chemistry to biology and pharmaceutical research.

One of the main features of the Gilson 600MP is its ability to support multiple vessels simultaneously, making it an ideal choice for high-throughput environments. The device can handle up to six beakers or flasks concurrently, each equipped with its own magnetic stirring bar. This capacity allows researchers to conduct multiple experiments at once, significantly increasing efficiency and productivity in the lab.

The Gilson 600MP boasts advanced technology such as its embedded microprocessor, which regulates and controls various parameters such as speed and heating. This results in consistent stirring speeds and temperature control, crucial for sensitive applications where uniform results are required. The stirring speed is adjustable, allowing users to choose the optimal rate for their specific samples, ranging from gentle mixing to vigorous agitation.

Another remarkable aspect of the Gilson 600MP is its compact and ergonomic design. With a sleek footprint, the unit conserves valuable bench space while still providing ample mixing capacity. The user-friendly interface includes an easy-to-read digital display that shows real-time information, enabling quick adjustments as needed.

Furthermore, the Gilson 600MP is equipped with robust safety features, including over-temperature protection and an automatic shut-off mechanism, which safeguard both the equipment and the user during operation. Additionally, the device’s durable construction is designed to withstand the rigors of daily laboratory use, ensuring longevity and dependability.

In terms of versatility, the Gilson 600MP is compatible with a wide range of vessel sizes and materials, accommodating various experimental setups. Its ability to integrate with external temperature control devices further enhances its functionality, allowing for precise thermal management during reactions.

In conclusion, the Gilson 600MP is a remarkable tool in the laboratory, favored for its multi-position capabilities, cutting-edge technology, user-friendly design, and robust safety features. As more laboratories seek efficient solutions to enhance their workflow, the 600MP continues to be a go-to choice for researchers looking to achieve optimal mixing results.
Top Page Image Contents