Gilson 600MP manual TOW Pole Assembly, Saftey Chains

Page 7

TOW POLE ASSEMBLY

The tow pole assembly is located on the front of the mixer and is used for transport only.

For transport, pull the tow pole assembly out, line up the hold and insert the L-shaped pin through holes.

When operating the mixer, pull the L-shaped pin out of the hole and push tow pole assembly all the way in. Line up the holes and insert the L-shaped pin through the holes.

SAFTEY CHAINS

For transporting the mixer, slide the tow pole out as far as possible and insert the locking pin. When operating the mixer, slide the tow pole in and lock it in place.

Make sure drum is locked in position and engine housing is closed and secured.

1.Cross the chains under the tow pole to prevent the tow pole from dropping to the ground if the mixer comes loose.

2.Pass chain around a frame member or secure bumper iron and hook it back to itself for strongest attachment. If the chain hook is attached to a frame member or bumper iron or hole, it may slip off or the hook straightened out if the mixer comes loose. Attach chains securely.

3.Allow only enough slack in chains to permit proper turning of vehicles. Do not let chains drag on ground, or to be drawn up too tight. Slack length should hold tow pole and front leg off the ground with the mixer loose. (Fig. 2)

NOTE: SAFETY CHAIN LENGTH MAY NEED TO BE ALTERED FOR PROPER CONNECTION TO TOW VEHICLE. REPOSITION HOOKS, DO NOT CUT CHAIN.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Gilsjn Mixers Gilsjn MixersIntroduction Table of Contents Drum While the Mixer is Running Safety PrecautionsAssembly and PRO-OPERATIONAL Checks Clutch Control Lever Controls and OperationsSaftey Chains TOW Pole AssemblyOperating the Mixer Mixer TransportExtension Cords for Electric Motors Loading the Mixer CleaningDischarging the Mixer Trouble Shooting Guide for MP Mixers Masonry Construction Guidelines Drum Seal HousingsOperating Guidelines LubricationWheel Bearings Mixing Shaft BearingsDrum Shaft Bearing Hangers ENGINE/MOTORRubber Wiper Blades AdjustmentENGINE/MOTOR Drive Storage Page Drum & Drive Page Mixing Blades Page Engine Housing and Axle Page FRAME, Drive and Clutch Control Page Engine and Power Options Page Engine and Power Options Gilson Mixer Warranty HOW to Obtain Parts Service Information

600MP specifications

The Gilson 600MP series is a sophisticated line of multi-position magnetic stirrers that have gained a reputation for their exceptional performance and versatility in laboratories around the world. Designed to provide precise and reliable mixing, the Gilson 600MP excels in applications ranging from chemistry to biology and pharmaceutical research.

One of the main features of the Gilson 600MP is its ability to support multiple vessels simultaneously, making it an ideal choice for high-throughput environments. The device can handle up to six beakers or flasks concurrently, each equipped with its own magnetic stirring bar. This capacity allows researchers to conduct multiple experiments at once, significantly increasing efficiency and productivity in the lab.

The Gilson 600MP boasts advanced technology such as its embedded microprocessor, which regulates and controls various parameters such as speed and heating. This results in consistent stirring speeds and temperature control, crucial for sensitive applications where uniform results are required. The stirring speed is adjustable, allowing users to choose the optimal rate for their specific samples, ranging from gentle mixing to vigorous agitation.

Another remarkable aspect of the Gilson 600MP is its compact and ergonomic design. With a sleek footprint, the unit conserves valuable bench space while still providing ample mixing capacity. The user-friendly interface includes an easy-to-read digital display that shows real-time information, enabling quick adjustments as needed.

Furthermore, the Gilson 600MP is equipped with robust safety features, including over-temperature protection and an automatic shut-off mechanism, which safeguard both the equipment and the user during operation. Additionally, the device’s durable construction is designed to withstand the rigors of daily laboratory use, ensuring longevity and dependability.

In terms of versatility, the Gilson 600MP is compatible with a wide range of vessel sizes and materials, accommodating various experimental setups. Its ability to integrate with external temperature control devices further enhances its functionality, allowing for precise thermal management during reactions.

In conclusion, the Gilson 600MP is a remarkable tool in the laboratory, favored for its multi-position capabilities, cutting-edge technology, user-friendly design, and robust safety features. As more laboratories seek efficient solutions to enhance their workflow, the 600MP continues to be a go-to choice for researchers looking to achieve optimal mixing results.
Top Page Image Contents