Introduction

This operator’s manual has been prepared to provide the information you need to correctly operated and maintain your mixer. For maximum satisfaction, carefully read and follow the instructions in this manual. Should you need repair parts or service, refer to the parts breakdown on pages 14 through 27.

Information regarding operation and maintenance of the factory-installed engine or motor can be found in a separate engine/motor owner’s manual supplied with the mixer. The manual prepared by the engine/motor manufacturer gives you the information necessary regarding engine adjustments, operation and maintenance. Should any questions arise concerning engine operation or service, contact the nearest engine/motor repair facility or dealer. For dealers in your area, consult the Yellow Pages under “Engines-Gasoline” or “Motors-Electric”.

Be sure safety precautions are observed. Read and follow all safety and operating instructions in this operator’s manual.

The replacement of any part on this product by other than the manufacturer’s authorized replacement part may adversely affect the performance, durability, or safety of the product.

The manufacturer reserves the right to make changes on, or add improvements to its product at any time reserves the right to decide, upon its sole discretion and at any time, to discontinue a product.

NOTICE: Record the model and serial numbers of your unit (located on the nameplate) in the spaces provided below. Engine model, type and code numbers are located on the engine blower housing, cylinder head or back plate.

PRODUCT MODEL NUMBER: ________________________________

PRODUCT SERIAL NUMBER: ________________________________

ENGINE/MOTOR MODEL NUMBER: __________________________

ENGINE/MOTOR CODE NUMBER: ____________________________

PURCHASE DATE: _________________________________________

DEALER PURCHASED FROM: _______________________________

DEALER ADDRESS: ________________________________________

DEALER PHONE NUMBER: _________________________________