GE Monogram ZDIB50 installation instructions Custom Door and Access Panels-1/4″Thick

Page 14

CUSTOM DOOR AND ACCESS PANELS

Custom Door and Access Panels—1/4″Thick

Cut panels to the same size as the production metal panel.

Door Lower

Bin Panel

 

 

 

 

 

Wood Panel

111/4″

 

1115/16″

Dimensions

 

 

 

 

 

 

 

 

 

 

 

 

1/4″

17″

Custom Door and Access Panels—3/4″Thick

17″

These door and access panels—both raised and flat design—should be constructed in the same manner as typical cabinet doors or drawers.

Storage bin door panel:

•Cut the panel 17″ wide x 111/4″ high.

•Rout the top and both sides 5/16″ wide, 1/2″ deep for a total thickness of 1/4″.

•Rout the bottom of the panel 1″ wide, 1/2″ deep for a total thickness of 1/4″. This will allow the door to

open without binding against the lower panel. For a custom appearance, consider tapering this 1″ rout.

Lower access panel:

•Cut the panel 17″ wide x 1115/16″ high.

•Rout all four sides 5/16″ wide and 1/2″ deep for a total thickness of 1/4″.

Storage Bin Door Panel

Rout 1/2″ deep, 1″ wide across bottom Rout 1/2″ deep, 5/16″ wide top and sides

Rout 1/2″ deep, 5/16″ wide on all sides

Lower Access Panel

17″

3/4″ Thick Panels

111/4″

1115/16″

Install Custom Door and Access Panels

To install the storage bin door panel:

1.Open the storage bin door.

2.Remove the two screws on top

of the door which hold the handle.

3.Remove the handle.

4.Slide the metal panel out.

5.Break off the ribs on the door insulation to allow for the wood thickness.

6.Slide the wood panel into the door frame.

7.Replace the handle and screws.

Remove all door insulation ribs to accept wood panel thickness

To install the lower access panel:

WARNING: Make sure the icemaker is disconnected from the main power supply before removing the lower access panel. Failure to do so could result in electric shock or personal injury.

1.Remove the screw at the top of the lower access panel assembly and the two screws at the bottom that hold the lower access panel assembly to the icemaker.

2.Remove the two screws from the top panel trim.

3.Slide the metal panels and spacers out.

4.Slide the wood panel into the door frame.

5.Replace the top of the panel assembly.

14

NOTE: Make sure the galvanized panel is replaced in back of the panel assembly.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Monogram.TM Contents IntroductionIf YOU Need Service Help US Help YOU…Important Safety Instructions Read All Instructions Before Using This ApplianceOperating Your Icemaker How the Icemaker WorksFeatures of Your Icemaker Setting the ControlsCleaning the Condenser Care and CleaningCleaning Outside Surfaces Dirty or clogged condenserCleaning the Icemaker System Turn the Cycle Control Knob to OFFCleaning the Inside Parts of the Icemaker Remove the hose from the water pumpFiltering and Treating Water Changing the Light BulbLocation PreparationUnpacking the Icemaker LevelingTo change the panel Door and Access PanelsChanging the Bin Door Panel Changing the Lower Access Panel Custom Door and Access Panels-3/4″Thick Custom Door and Access PanelsCustom Door and Access Panels-1/4″Thick Install Custom Door and Access PanelsVacation and Moving To shut down the icemakerFor the Installer Free Standing InstallationInstallation Requirements Recommended Grounding MethodsAn electrical branch circuit of 115 volt, 60 Hz Each installation is unique but will requireDrain pump specifications Connect to water. Observe local codesInstallation Instructions Drain PumpQUESTIONS? USE this Problem Solver We’ll Be There Warranty Page Máquina para hacer hielo Introducción ContenidoAyudenos a AYUDARLE… SI SE Necesita ServicioInstrucciones DE Seguridad Operacion DE SU Maquina Para Hacer Hielo Cómo funciona la máquina para hacer hieloPase Caracteristicas DE SU Maquina Para Hacer HieloAjustando los controles Limpieza del condensador Cuidado Y LimpiezaLimpieza de las superficies exteriores Un condensador sucio o tapadoAgua* y haga girar La perilla de Control De ciclo hasta la Limpieza del sistema de la máquina para hacer hieloCaliente del grifo En la bandeja para Limpieza de los componentes interiores Filtrado y tratamiento del agua Cambio de la bombillaNivelación PreparacionLocalización Calibraciones del termostatoPuerta Y Paneles DE Accesso Para cambiar el panelCómo cambiar el panel inferior de acceso Puede sufrir un choque eléctrico o lesiones personalesPuerta y paneles de acceso a la medida de 3/4″ de espersor Puerta Y Paneles DE Acceso a LA MedidaPuerta y paneles de acceso a la medida de 1/4″ de espesor Vacaciones y mudanzas Para el instalador Instalacion IndependienteInstrucciones Para LA Instalacion Métodos que se recomiendan para conectar a tierraCada instalación es individual pero requerirá 237/8″Nivelacion Continuación¿ALGUNA PREGUNTA? Consulte Estas Soluciones Estaremos Con Usted Garantia Notas

ZDIB50 specifications

The GE Monogram ZDIB50 is a standout built-in refrigerator that offers a fusion of sophisticated design and advanced technology, appealing to culinary enthusiasts and design aficionados alike. With a total capacity of 20.7 cubic feet, this refrigerator provides ample storage space for groceries, beverages, and other essentials, making it a perfect fit for any modern kitchen.

One of the standout features of the ZDIB50 is its dual-compressor system, which allows for independent temperature control of the refrigerator and freezer compartments. This technology not only maintains optimal temperatures but also ensures food preservation by minimizing temperature fluctuations. The refrigerator’s advanced climate control system includes humidity-controlled crispers, which help keep fruits and vegetables fresh for longer periods, enhancing the overall longevity of your food items.

The design of the GE Monogram ZDIB50 is as impressive as its features. Its sleek stainless steel exterior, complemented by integrated handles, adds a touch of elegance to any kitchen. The unit also comes with a customizable panel option, allowing homeowners to match it with their cabinetry for a seamless look. Inside, the refrigerator features glass shelves that are adjustable and spill-proof, making clean-up and organization a breeze. The bright LED lighting illuminates the interior, showcasing the contents and making it easier to find what you need.

In terms of energy efficiency, the ZDIB50 boasts significant energy savings, being ENERGY STAR certified. This certification not only benefits the environment but also helps reduce utility costs for homeowners. The refrigerator is equipped with smart features that allow users to monitor and manage its performance remotely through a smartphone app, giving added convenience to busy lifestyles.

The ice maker is another highlight of the GE Monogram ZDIB50, producing a plentiful supply of crescent-shaped ice, which is perfect for entertaining guests or enjoying refreshing beverages. The water filtration system ensures that the ice is made from clean and purified water, enhancing safety and flavor.

In conclusion, the GE Monogram ZDIB50 combines cutting-edge technology, excellent efficiency, and sophisticated design into one remarkable appliance. It reflects the perfect balance of style and functionality, catering to those who demand the best in their kitchen. Whether you are a casual cook or a gourmet chef, this refrigerator is sure to enhance your culinary experience.
Top Page Image Contents