CONDENSATE
EVAPORATOR
ON
AUTO
POWER
ON
OFF
Power Switch 
The Power Switch is the ON/OFF switch for the cooling system. When first turning the unit on, there is a safety delay of 5 minutes. On the temperature display, a red LED light will light up beside WINE to indicate that
Condensate Evaporator Switch 
The ON position of the Condensate Evaporator Switch activates the heating element whenever water is present in the evaporator pan. The AUTO position of the Condensate Evaporator Switch activates the heating element at regular intervals to remove excess water from the evaporator pan, as needed.
In most environments, the Condensate Evaporator Switch should be kept in the ON position. If your wine vault is located in a dry climate, excess water may not accumulate in the evaporator pan. In this case, turn the Condensate Evaporator Switch to the AUTO setting to save electricity.
13