GE Monogram ZGU384N Cooktop Installation Over a, Model ZET1, ZEK938 or ZET938

Installation Options

COOKTOP INSTALLATION OVER A

27″ OR 30″ MONOGRAM SINGLE OVEN,

MODEL ZET1, ZEK938 OR ZET938

These cooktops may be installed over the Monogram ZET1, ZEK938 or ZET938 single oven. Both the cooktop and the oven must be installed according to each specific installation instruction.

–Allow 4″ Min. clearance from the top of the countertop to the top of the oven cutout.

POWER SUPPLY

The oven requires a separate, properly grounded

20 Amp, 3-wire 208 or 240 volt, 60 Hz power supply. The cooktop requires a separate 120V power supply. See page 8. Where codes permit, the gas shut-off valve may be located in an adjacent cabinet or other easily accessible location.

Cooktop

28-1/2″

19-5/8″

1-1/2″cabinet top

25″

2-1/2″min.

36″

4″ min. countertop height

23-1/2″min.

4″ high toekick

Use a 30″ or wider base cabinet.

A B

		Ovens	Dim. A	Dim. B
	C	30″	28-1/2″min.	27-1/4″min.
			28-5/8″max.	27-5/16″max.
	L
C	25″	27″	25″ min.	27-5/8″min.
L			″	″
			25-1/4 max.	28-1/8 max.

Use two 2x4’s or equivalent runners spaced 25″ centerline to centerline in the opening and flush with top of toekick.

Or elevate the oven floor to desired height. The support must be level, rigidly mounted and capable of supporting 200 lbs.

•For best appearance, the cooktop should be centered over the oven.

14