Extron electronic PVT SW RGB, PVT CV Installing the PVT Twisted Pair Transmitters, Tabletop use

Page 15

Installing the PVT Twisted Pair Transmitters

The PVT CV is a 1/8 rack shelf mountable transmitter, and the PVT RGB, PVT RGB CV, and PVT SW RGB are 1/4 rack shelf mountable transmitters. Each of the four models can be mounted under a desk or shelf, or on to certain projector mounts, and are also suitable for tabletop use.

Tabletop use

The PVT comes with self-adhesive rubber feet attached to the four corners of the bottom. Set the PVT on a horizontal surface.

UL requirements for rack mounted devices

The following Underwriters Laboratories (UL) requirements pertain to the safe installation of the PVT transmitter in a rack.

1. Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the device in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.

2. Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (e.g., use of power strips).

Rack mounting

For rack mounting, mount the PVT on a VersaTools® 19" 1U rack shelf (RSF 123, part #60-190-20or RSB 123, #60-604-20) (figure 2-1) or on a standard 1U rack shelf (RSU 129, part #60- 190-01or RSB 129, #60-604-01) (figure 2-2). On standard rack shelves, the PVT CV can be mounted in one of eight locations to the rear or the front of the rack, and the PVT RGB and RGB CV in one of four locations to the rear or front of the rack.

PVT Series (Rack Mount Models) • Installation

2-3

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PoleVault Twisted Pair Transmitters Rack Mount Models PVT CV, PVT RGB CVSafety Instructions English Precautions噝 This page was deliberately left blank Table of Contents Table of Contents, contd PVT Series Rack Mount Models OneIntroduction About the PVT TransmittersTransmission distance About the PVT RGB About the PVT CVIntroduction, cont’d About the PVT RGB CVAbout the PVT SW RGB PVS 204SA Application DiagramIntroduction, contd Two Installation UL/Safety RequirementsImportant safety instructions Rack mounting Installing the PVT Twisted Pair TransmittersTabletop use UL requirements for rack mounted devicesMounting the PVT on a VersaTools rack shelf Installation, cont’dMounting the PVT under a desk Furniture mountingFront panel features Installation, cont’d Connections and SettingsInput selection button with LED PVT SW RGB only 6ba Rear panel featuresRCA audio connectors Wiring the twisted pair composite video and audio cable Cable termination for RGB video and audio transmission 11 Connecting RGB outputs a and B to the PVS 204SA switcher AppendixAA Reference Material SpecificationsAudio output to a PVS 204SA Video output composite video CV modelsSync composite video CV models Audio inputReference Material, cont’d Part NumbersIncluded Parts MBB 100, back of rack mounting kit Optional AccessoriesPVT Series Rack Mount Models Reference Material FCC Class a Notice Extron’s WarrantyExtron Electronics, Europe Beeldschermweg 6C

PVT CV, PVT SW RGB, PVT RGB CV, PVT RGB specifications

Extron Electronics is a prominent player in the audiovisual field, known for its innovative and high-quality products tailored for a variety of applications. Among their extensive lineup, the PVT (Presentation Video Transport) series stands out, featuring models such as PVT RGB, PVT RGB CV, PVT SW RGB, and PVT CV. Each of these models is specifically designed to enhance signal management, video transport, and overall performance in any AV environment.

The PVT RGB model is engineered to transport Red, Green, and Blue video signals, providing users with uncompromised video quality. One of the key characteristics of this product is its ability to support resolutions up to 4K, ensuring crisp and detailed images for any application ranging from corporate presentations to educational settings. In addition, the PVT RGB employs advanced signal processing protocols which minimize latency and ensure real-time transmission.

Moving to the PVT RGB CV version, this model builds upon the robustness of the PVT RGB. It integrates composite video capabilities, allowing users to switch between RGB and CV formats seamlessly. This versatility makes it ideal for setups that require compatibility with various video formats, enhancing workflow efficiency without compromising video integrity.

The PVT SW RGB model introduces an additional layer of functionality by incorporating switcher capabilities. This is particularly beneficial for environments where multiple input sources are utilized, such as conferences or video production studios. The intelligent switching technology featured in the PVT SW RGB allows for quick transitions between sources while maintaining high-quality signal output, facilitating smooth presentations.

Lastly, the PVT CV version focuses on tailored solutions for transport and management of composite video signals. It maintains the high standards seen across the PVT series and includes unique features such as customizable settings and error detection, which ensure optimal performance and reliability under diverse conditions.

All models in the PVT series prioritize user-friendly interfaces and robust build quality, making them suitable for both permanent installations and mobile applications. They also support Extron’s proprietary technologies, including EDID Management and signal amplification, maximizing compatibility and performance across diverse AV equipment. With their blend of features, technologies, and characteristics, Extron’s PVT series is well-equipped to meet the demands of modern audiovisual environments, empowering users to deliver exceptional presentations with ease.
Top Page Image Contents