Extron electronic PVT RGB CV, PVT CV, PVT SW RGB manual Reference Material, Specifications

Page 26

Reference Material

Specifications

NThese transmitters are compatible only with the Extron PVS 204SA. They are not compatible with other models of twisted pair receivers.

Video — RGB (RGB models)

Gain

Unity

Video input and loop-through — RGB (RGB models)

Number/signal type	1 VGA-UXGA RGBHV, RGBS
	(2 for PVT SW RGB, and 1 buffered loop
	through)
Connectors	1 female 15-pin HD (2 for PVT SW RGB)
Nominal level	0.7 Vp-p for RGB
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance	75 ohms
Horizontal frequency	15 kHz to 130 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-30 dB @ 5 MHz
DC offset (max. allowable)	250 mV

Video output — RGB (RGB models)

Number/signal type	2 analog proprietary signals
Connectors	2 female RJ‑45

Sync — RGB (RGB models)

Input type	RGBHV, RGBS
Input level	3.5	V to 5.5 Vp-p, unterminated
Input impedance	510 ohms
Max. input voltage	5.5	Vp-p

Video — composite video (CV models)

Gain	Unity
Differential phase error	<1.0º at 3.58 MHz and 4.43 MHz
Differential gain error	<1.0% at 3.58 MHz and 4.43 MHz

Video input — composite video (CV models)

Number/signal type	1 composite video
Connectors	1 female RCA
Nominal level	1 Vp-p for composite video
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset

A-2	PVT Series (Rack Mount Models) • Reference Material

Image 26

Contents PVT CV, PVT RGB CV PoleVault Twisted Pair Transmitters Rack Mount ModelsPrecautions Safety Instructions English噝 This page was deliberately left blank Table of Contents Table of Contents, contd One PVT Series Rack Mount ModelsTransmission distance IntroductionAbout the PVT Transmitters About the PVT CV About the PVT RGBAbout the PVT SW RGB Introduction, cont’dAbout the PVT RGB CV Application Diagram PVS 204SAIntroduction, contd Two Important safety instructions InstallationUL/Safety Requirements UL requirements for rack mounted devices Installing the PVT Twisted Pair TransmittersTabletop use Rack mountingInstallation, cont’d Mounting the PVT on a VersaTools rack shelfFurniture mounting Mounting the PVT under a deskInstallation, cont’d Connections and Settings Front panel featuresInput selection button with LED PVT SW RGB only Rear panel features 6baRCA audio connectors Wiring the twisted pair composite video and audio cable Cable termination for RGB video and audio transmission 11 Connecting RGB outputs a and B to the PVS 204SA switcher AppendixAA Specifications Reference MaterialAudio input Video output composite video CV modelsSync composite video CV models Audio output to a PVS 204SAIncluded Parts Reference Material, cont’dPart Numbers Optional Accessories MBB 100, back of rack mounting kitPVT Series Rack Mount Models Reference Material Extron’s Warranty FCC Class a NoticeExtron Electronics, Europe Beeldschermweg 6C