Extron electronic PVT CV, PVT RGB CV manual Furniture mounting, Mounting the PVT under a desk

Page 17

Furniture mounting

Use the optional mounting kit (MBU 123, under desk mounting kit, part #70-212-01) to mount the PVT as follows:

1.

If installed, remove the feet from the bottom of the PVT.

2.

Attach the mounting brackets to the PVT with the machine

 

screws provided (figure 2-3).

Figure 2-3 — Mounting the PVT under a desk

3.

Hold the PVT with the attached brackets against the

 

underside of the mounting surface. Mark the bracket

 

screw hole locations on the mounting surface.

4.

Drill four 3/32" (2 mm) diameter pilot holes, 1/4" (6.3 mm)

 

deep in the mounting surface at the marked locations.

5.

Insert #8 wood screws into the pilot holes. Tighten the

 

screws until just less than 1/4" of the head protrudes.

6.

Align the mounting screws with the slots in the brackets

 

and place the PVT against the surface, with the screws

 

through the bracket slots.

7.

Slide the PVT slightly forward or back, then tighten all

 

four screws to secure the PVT in place.

PVT Series (Rack Mount Models) • Installation

2-5

Page 16 Page 18
Image 17
Page 16 Page 18
Contents PoleVault Twisted Pair Transmitters Rack Mount Models PVT CV, PVT RGB CVSafety Instructions English Precautions噝 This page was deliberately left blank Table of Contents Table of Contents, contd PVT Series Rack Mount Models OneTransmission distance IntroductionAbout the PVT Transmitters About the PVT RGB About the PVT CVAbout the PVT SW RGB Introduction, cont’dAbout the PVT RGB CV PVS 204SA Application DiagramIntroduction, contd Two Important safety instructions InstallationUL/Safety Requirements Tabletop use Installing the PVT Twisted Pair TransmittersUL requirements for rack mounted devices Rack mountingMounting the PVT on a VersaTools rack shelf Installation, cont’dMounting the PVT under a desk Furniture mountingFront panel features Installation, cont’d Connections and SettingsInput selection button with LED PVT SW RGB only 6ba Rear panel featuresRCA audio connectors Wiring the twisted pair composite video and audio cable Cable termination for RGB video and audio transmission 11 Connecting RGB outputs a and B to the PVS 204SA switcher AppendixAA Reference Material SpecificationsSync composite video CV models Video output composite video CV modelsAudio input Audio output to a PVS 204SAIncluded Parts Reference Material, cont’dPart Numbers MBB 100, back of rack mounting kit Optional AccessoriesPVT Series Rack Mount Models Reference Material FCC Class a Notice Extron’s WarrantyExtron Electronics, Europe Beeldschermweg 6C

PVT CV, PVT SW RGB, PVT RGB CV, PVT RGB specifications

Extron Electronics is a prominent player in the audiovisual field, known for its innovative and high-quality products tailored for a variety of applications. Among their extensive lineup, the PVT (Presentation Video Transport) series stands out, featuring models such as PVT RGB, PVT RGB CV, PVT SW RGB, and PVT CV. Each of these models is specifically designed to enhance signal management, video transport, and overall performance in any AV environment.

The PVT RGB model is engineered to transport Red, Green, and Blue video signals, providing users with uncompromised video quality. One of the key characteristics of this product is its ability to support resolutions up to 4K, ensuring crisp and detailed images for any application ranging from corporate presentations to educational settings. In addition, the PVT RGB employs advanced signal processing protocols which minimize latency and ensure real-time transmission.

Moving to the PVT RGB CV version, this model builds upon the robustness of the PVT RGB. It integrates composite video capabilities, allowing users to switch between RGB and CV formats seamlessly. This versatility makes it ideal for setups that require compatibility with various video formats, enhancing workflow efficiency without compromising video integrity.

The PVT SW RGB model introduces an additional layer of functionality by incorporating switcher capabilities. This is particularly beneficial for environments where multiple input sources are utilized, such as conferences or video production studios. The intelligent switching technology featured in the PVT SW RGB allows for quick transitions between sources while maintaining high-quality signal output, facilitating smooth presentations.

Lastly, the PVT CV version focuses on tailored solutions for transport and management of composite video signals. It maintains the high standards seen across the PVT series and includes unique features such as customizable settings and error detection, which ensure optimal performance and reliability under diverse conditions.

All models in the PVT series prioritize user-friendly interfaces and robust build quality, making them suitable for both permanent installations and mobile applications. They also support Extron’s proprietary technologies, including EDID Management and signal amplification, maximizing compatibility and performance across diverse AV equipment. With their blend of features, technologies, and characteristics, Extron’s PVT series is well-equipped to meet the demands of modern audiovisual environments, empowering users to deliver exceptional presentations with ease.
Top Page Image Contents