GE Monogram ZFSB23DSS Start Icemaker, Temperature Controls, Install Toekick

Page 10

Installation Instructions

STEP 9 START ICEMAKER

Power Switch

Feeler Arm

•Slide the switch to ON position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (–9°C) or below. It will then begin operation automatically. It will take 2–3 days to fill the ice bin.

•Be sure nothing interferes with the sweep of the feeler arm. Do not place objects in the path of the feeler arm.

•Discard the first full bucket of ice cubes.

•To turn the icemaker off, set the switch to OFF.

STEP 10 TEMPERATURE

CONTROLS

•The temperature controls are preset at 37°F for the refrigerator and 0°F for the freezer.

•Allow 24 hours to stabilize before making adjustments.

STEP 11 INSTALL TOEKICK

•Press toekick into position and reinstall one screw on each side.

Toekick Screw

IMPORTANT: The vented toekick must remain unobstructed for proper air circulation.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation Instructions Monogram.comContents Before YOU BeginAdditional Specifications Installation SpaceInstallation in a corner Air Circulation ClearancesGrounding the Refrigerator Tools Required FlooringMaterials Required Important Please read carefullyModel ZFSB25 Move Refrigerator IndoorsModel ZFSB23 Move Refrigerator Indoors Against the truck only Install Water LineTo move the refrigerator indoors Shut off the main water supplyConnect Water Supply Connect PowerMove Refrigerator Into Position Level the Doors To Adjust the RollersLevel the Refrigerator Screw Down Support LEGInstall Toekick Temperature ControlsStart Icemaker Page GE Consumer & Industrial
Top Page Image Contents